Chinese Carbon MTB > 29+ & 27+
Ican P8 full suspension build
pedro:
Hello, I wonder there will be any clearance issues with rear shock with reservoir like rockshox monarch plus rc3?
carbonazza:
--- Quote from: Bos on May 02, 2018, 05:30:28 AM ---One last thing. is it just me or do the cables inside the downtube rattle like hell? I'm considering shoving some foam in there to quiet things down.
--- End quote ---
There is an existing post here about using some foam. But I can't find it...
On my bikes I did cut an insulation tube used for heating pipes.
Cutting a section of about 30mm by 20mm, and about the length of the downtube.
Then remove the fork, and insert it from the headtube down to the bottom bracket.
Canyon have an interesting approach.
They have a hole between the two inserts to screw the bottle cage in the downtube.
And a special plastic hook, grabs the cable suspending them in the middle of the downtube.
thesmokingman:
Foam sleeve... there is an actual bike product, norattles and another but I cannot remember the name.
https://smile.amazon.com/dp/B00K85ASYA/?coliid=I1QUYQ9S8X7AWY&colid=3511P7RWFNKOU&psc=0&ref_=lv_ov_lig_dp_it
Bos:
--- Quote from: thesmokingman on June 19, 2018, 01:04:14 AM ---Foam sleeve... there is an actual bike product, norattles and another but I cannot remember the name.
https://smile.amazon.com/dp/B00K85ASYA/?coliid=I1QUYQ9S8X7AWY&colid=3511P7RWFNKOU&psc=0&ref_=lv_ov_lig_dp_it
--- End quote ---
This is a very cleaver Idea. Thanks!
samroy92:
--- Quote from: thesmokingman on June 19, 2018, 01:04:14 AM ---Foam sleeve... there is an actual bike product, norattles and another but I cannot remember the name.
https://smile.amazon.com/dp/B00K85ASYA/?coliid=I1QUYQ9S8X7AWY&colid=3511P7RWFNKOU&psc=0&ref_=lv_ov_lig_dp_it
--- End quote ---
Is it easy to perform maintenance and replace cables after inserting the foam into the tube?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version