Chinese Carbon MTB > 29+ & 27+
BKR/Lexon B627 140mm frame
carbonazza:
--- Quote from: FatbikeRacer on May 14, 2018, 09:19:20 PM ---Has anybody else had issues running the rear hydraulic brake hose from the rear? I can get it past an obstruction in the down tube and have tried almost everything I can think of or google has. Any advice would be great, it is the last part to the build and it is making me angry.
--- End quote ---
Sometimes yes :-\.
But after trying harder, it finds its way in general.
The hose has generally a curve, so you can use it to try to run it on the top/right/bottom/left of the chainstay and avoid the obstacle.
Did you try to run a cable( brake or shifter ) with a magnet to see if it goes through?
Or you can try with another hose from the bottom bracket to the back, just to find/force a path.
Good luck !
tripleDot:
The mechanic who assembled one of my Chiner bike run into a snagging problem routing the hydraulic hose from the rear, I suggested routing it from the front to rear and it got through much easier.
ZacEfron:
ing the hydraulic hose from the rear, I suggested routing it from the front to rear and it
Navigation
[0] Message Index
[*] Previous page
Go to full version