Chinese Carbon MTB > 29+ & 27+

Ican P8 Season One Review

<< < (3/3)

Janz99:
I started out with BMX's in my younger years, though I was never all that good at it. 

Bos:
Great post. Thanks for sharing.

If you dont mind I'd like to share my experience with my P8.
I got my P8 last year March, and I've only recently got it dialled.. But almost a year down the line I am very glad I took the plunge(my first chiner frame)

I first rode the bike as a slightly more heavy duty 29'' XC bike with a 2012 Revelation fork set to 120, and a RP23 Rear shock(firm tune) and lightweight wheels.
The ride was quite harsh (previously rode an Alu bike) but probably also due to the firm rear. However the geometry was a lot more confidence inspiring and I quickly started dining up my rear rim. In the trail mode the bike was still plenty fast enough to ride up hills fast.


I currently have a Fox Float DPS EVOL (200x58mm), with low compression tune, which is mega plush and ground hugging. It matches my Formula 35 fork set to 140mm perfectly, as you'll go far to find a smoother and supple fork. I'm running 2.35's on 30mm ID rims and I'm now very happy. Not sure of the overall weight but probably around 13kg. Its my do it all bike at the moment although I dont do much long distance stuff currently.

With the 140mm fork the HA' sits bang on 67DEG
Seat angle is way slack, and I've had to slide my saddle forward all the way. Thats probably my only real issue with this bike. Climbing is only done in the middle setting on my rearshock) In full open the extra sag going up hill makes the bars even higher and the front hard to control going up steep pitches.
My Water bottle rivets has also came loose, and I'll eventually replace them. After a shuttle day at a local bike park where I cased many - many jumps and landed pretty harshly on a road gap (I did 7 runs) the rear got a creak which had me wondering, but I figured It was time for a grease since I've given the pivots no TLC since I built it, and Its now silent.

So all in all I couldn't be happier. I got a Light and capable frame with geometry that is up to date enough for me, and I paid less than what a new Fork would have cost me.

Bos:
Here's a photo

Navigation

[0] Message Index

[*] Previous page

Go to full version