Author Topic: Carbonda fm936 Thoughts  (Read 513059 times)

wfl3

Re: Carbonda fm936 Thoughts
« Reply #2220 on: January 28, 2023, 06:56:14 AM »
Hello did you check how geometry has changed with the new link?
I would like to know what is the effect on bb height, reach and head angle.

Arno posted the geo chart from Carbonda at the end of this thread:  https://chinertown.com/index.php/topic,3986.0.html

No BB height, but I'd assume a few mm higher than the 100mm 936 since the new link is just pushing the rear end a bit further down.  Of course if you run more sag with the new link it will probably be very similar.


numberzero

Re: Carbonda fm936 Thoughts
« Reply #2221 on: January 28, 2023, 08:35:43 AM »
Arno posted the geo chart from Carbonda at the end of this thread:  https://chinertown.com/index.php/topic,3986.0.html

No BB height, but I'd assume a few mm higher than the 100mm 936 since the new link is just pushing the rear end a bit further down.  Of course if you run more sag with the new link it will probably be very similar.
Ok i saw.
Reach and HA are the same as the basic 100/100mm version but with 120/120 setup and bike raised by 1cm.

It's clearly a pretty different bike with the new link!

acedeuce802

Re: Carbonda fm936 Thoughts
« Reply #2222 on: January 28, 2023, 01:21:47 PM »
how big bottles fit in the frame?
I can fit 750ml along the downtube.  For the vertical bottle, 750ml touches the nozzle on the top tube but does fit in.  I'm going to adjust the design so the downtube bottle sits further back, and may be able to bring the vertical bottle down a bit, but it's a tight squeeze since you need to fit a nut in there without the nut or screw running into the downtube.

wfl3

Re: Carbonda fm936 Thoughts
« Reply #2223 on: January 28, 2023, 04:57:09 PM »
Ok i saw.
Reach and HA are the same as the basic 100/100mm version but with 120/120 setup and bike raised by 1cm.

It's clearly a pretty different bike with the new link!

A lot of us were running 100/120 and it is a bit different bike at 120/120 now with the new link.  Should be VERY similar geo to 100/100, just more suspension and a higher BB.

Arno Knell

Re: Carbonda fm936 Thoughts
« Reply #2224 on: January 29, 2023, 02:27:46 AM »
A lot of us were running 100/120 and it is a bit different bike at 120/120 now with the new link.  Should be VERY similar geo to 100/100, just more suspension and a higher BB.


My buddy Michael has both version in his garage.
100/100 (9,4kg) for xc race and marathon.
120/120 (10,4) for every day use.
He could now compare both bikes.
« Last Edit: January 29, 2023, 01:06:50 PM by Arno Knell »

volan

Re: Carbonda fm936 Thoughts
« Reply #2225 on: January 29, 2023, 12:54:01 PM »
Guys, I'm so glad I ran into this forum! I just recently started to "think outside" tipical mtb brands and decieded to take a chance at some chinese mtb full sus carbon frame. From what I've saw, fm936 seems to get most praise.

So if someone here could help me with some questions. Namely, I can't see the price on carbonda website, and I wonder how long does it take for them to respond since there''s no "buy" option, just "inquiry"?

And are there any brands on aliexpress that sell this frame? Do I have to order it only on carbonda site? I'm from EU if that means anything.

Thanks for help!

Arno Knell

Re: Carbonda fm936 Thoughts
« Reply #2226 on: January 29, 2023, 01:22:38 PM »
Guys, I'm so glad I ran into this forum! I just recently started to "think outside" tipical mtb brands and decieded to take a chance at some chinese mtb full sus carbon frame. From what I've saw, fm936 seems to get most praise.

So if someone here could help me with some questions. Namely, I can't see the price on carbonda website, and I wonder how long does it take for them to respond since there''s no "buy" option, just "inquiry"?

And are there any brands on aliexpress that sell this frame? Do I have to order it only on carbonda site? I'm from EU if that means anything.

Thanks for help!


@volan,
super light frame price 795,00 usd.
standard frame price 680,00 usd.
I placed my orders via alibaba app.
response time (same day of enquiry)
shipping cost (door to door including tax) 195,00 usd for one frame.
shipping cost for two frames 260,00 usd.


volan

Re: Carbonda fm936 Thoughts
« Reply #2227 on: January 29, 2023, 01:28:53 PM »


@volan,
super light frame price 795,00 usd.
standard frame price 680,00 usd.
I placed my orders via alibaba app.
response time (same day of enquiry)
shipping cost (door to door including tax) 195,00 usd for one frame.
shipping cost for two frames 260,00 usd.

You rock! Thanks alot. That's exactly the info i needed!!! I'll look around this thread a bit more, do some research and probably give it a go!

How long does it take to get it delivered?

Arno Knell

Re: Carbonda fm936 Thoughts
« Reply #2228 on: January 29, 2023, 01:55:13 PM »


How long does it take to get it delivered?
[/quote]

approximately 4 weeks after payment.

volan

Re: Carbonda fm936 Thoughts
« Reply #2229 on: January 29, 2023, 05:35:39 PM »

How long does it take to get it delivered?


approximately 4 weeks after payment.

Could you direct me to what else I need to buy for rear shock? Is this trunnion mount or not 165mm, and what bushings would I need to buy? Sorry, this will be my first full sus build so I'm kinda noob when it comes to rear shocks...

Medico

Re: Carbonda fm936 Thoughts
« Reply #2230 on: January 30, 2023, 12:01:41 AM »
Could you direct me to what else I need to buy for rear shock? Is this trunnion mount or not 165mm, and what bushings would I need to buy? Sorry, this will be my first full sus build so I'm kinda noob when it comes to rear shocks...

Not to be rude, but those questions are answered a couple of times...use the search option please...
And email carbonda direct instead of alibaba...sometimes cheaper, but always fast reply ( not these days, because of chinese newyear)

Good luck

Arno Knell

Re: Carbonda fm936 Thoughts
« Reply #2231 on: January 30, 2023, 01:41:14 AM »
Could you direct me to what else I need to buy for rear shock? Is this trunnion mount or not 165mm, and what bushings would I need to buy? Sorry, this will be my first full sus build so I'm kinda noob when it comes to rear shocks...

The rear shock is trunion mount.
The two bolts are included in the frame set.
For the eylet you must by one 8x30mm bushing set.
Note:
8x30 for the new 120/120 frame (linkage)
8x22,2mm for the 100/100 frame
« Last Edit: January 30, 2023, 01:46:16 AM by Arno Knell »

Eneen

Re: Carbonda fm936 Thoughts
« Reply #2232 on: January 30, 2023, 02:33:11 AM »
This new rocker doesn't make 120mm NS Synonym TR frame from geometry point of view. I'm not sure if NS has actual 120mm of travel, but they have 38mm BB drop while keeping 66 deg HA. With new rocker to get 66HA you would need to rise BB about 8mm, so actual BB drop will be about 27mm.

Arno Knell

Re: Carbonda fm936 Thoughts
« Reply #2233 on: January 30, 2023, 06:14:53 AM »
This new rocker doesn't make 120mm NS Synonym TR frame from geometry point of view. I'm not sure if NS has actual 120mm of travel, but they have 38mm BB drop while keeping 66 deg HA. With new rocker to get 66HA you would need to rise BB about 8mm, so actual BB drop will be about 27mm.


Dimension F in the drawing is 520mm
Dimension F SID ULTIMATE 120mm is 531mm
I measured HA 65,5°
BB high 330mm
« Last Edit: January 30, 2023, 07:00:32 AM by Arno Knell »

Eneen

Re: Carbonda fm936 Thoughts
« Reply #2234 on: January 30, 2023, 12:02:03 PM »
Surely not. 120mm rocker require 120mm fork to set frame into 67 deg HA (as stated in the table below drawing). How come have you got 65.5 if default HA is 67 deg and you haven't risen front wheel? To get 66 deg HA you need about 140mm fork.
EDIT: Indeed, 120mm Fox SC also has 530mm A2C, so with 120/120 setup HA will be about 66.5, but not 65.5, for sure.
« Last Edit: January 30, 2023, 12:39:39 PM by Eneen »