TanTan - Seraph FM121 XC 120mm Full Suspension 2024 model

[Specialf.]

Good evening everyone, as already mentioned the frame I received is raw so I disassembled everything to be able to paint it. if you want some photos or measurements of the bearings or pins ask for it. I also weighed all the individual components, for weight maniacs. The frame seems well made and finished quite well, but the bearings are full of carbon processing powder seem to me of poor quality, a bit of dancers. inside the frame is well cleaned and without scraps or cutouts of processing. one thing that left me amazed is the movement of the wagon. without shock absorber the frame struggles very much to make the whole excursion. the rear sheaths we said that they flex but I did not think so much. with bare hands it is difficult. I took a picture with the wagon disconnected, it seems that when it cushions it moves 40mm from the center of its natural trajectory. moreover the connecting rod has a considerable weight, according to me it is only covered with a sheet of carbon but it is metal. this weekand I proceed to paint then I have to wait for the handlebars but I will start to mount a few pieces, however I will constantly update you.

[gas0fa]

That's right, my friend. The bearings are of poor quality. I changed all the bearings. Could you put the measurements so we have them all, taking advantage of the fact that it is disassembled?

That shock absorber shaft is perfect, Rose told me that they were making a new one. I suppose it will be that one, and he will send it to us, and in black it is much prettier than in silver.

That frame in exposed carbon color, and in gloss I think it would be very very nice.

I have been able to try it and for now I am very happy with the performance of the frame.

[akuutti247]

Do you have a lot of experience in painting? A year a go I painted my first aluminum frame.

The best information I found came from this YouTube channel:

 https://www.youtube.com/@ETOE/videos

[Specialf.]

That's right, my friend. The bearings are of poor quality. I changed all the bearings. Could you put the measurements so we have them all, taking advantage of the fact that it is disassembled?

That shock absorber shaft is perfect, Rose told me that they were making a new one. I suppose it will be that one, and he will send it to us, and in black it is much prettier than in silver.

That frame in exposed carbon color, and in gloss I think it would be very very nice.

I have been able to try it and for now I am very happy with the performance of the frame.

I also think that measuring the bearings now is a good idea. I will try to measure them tomorrow, but I will do it without disassembling them, I will do it when it is time to replace them.

Today I tried a color and two types of transparent, one opaque and one glossy, they are both very beautiful but I prefer the glossy one.

[Specialf.]

Do you have a lot of experience in painting? A year a go I painted my first aluminum frame.

The best information I found came from this YouTube channel:

 https://www.youtube.com/@ETOE/videos

no I have no experience I think I will follow your advice, even if I would like to start painting tomorrow.

[Specialf.]

regarding the brake hose and gear cable routing, don't you think those 2 holes between the frame and the main triangle are too small and restrictive during the movement of the frame? I'm considering opening a small window in the rear frame.

[gas0fa]

These holes are ideal, the covers fit well, but I do recommend greasing the cover a little so that it fits perfectly.

I wouldn't touch the holes, to be honest.