29+ xc build

[Tan4x4]

I just ordered the FLX-FR-701 for a project build. In the tech specs online it calls for a BB92. My question is on the headset size. I could not find out what combo I need to order for the taper head tube. I see that it mimics the CS-496 frame that was built upon this site. So, I searched for the topic in the 496 builds, but it looks like that frame came with a headset from the factory and there was no mention of the sizes used.  Anyone that built a 496 know what headset size was used?  would it be best to measure when the frame gets here in a couple of weeks?  Thanks for any input

[carbonazza]

I just ordered the FLX-FR-701 for a project build. In the tech specs online it calls for a BB92. My question is on the headset size.

Most Chinese frames come with this type of headset:
https://a.aliexpress.com/_s2Z4uW

[Tan4x4]

Thank you. I will check it out

[Tan4x4]

The frame should be here this week or the beginning of next week. good thing they had my size in stock otherwise it would be May before I saw it. In the meantime, I have been stockpiling parts for the build. here is my build sheet so far
lefty carbon for 29 with lockout
project 321 tapered lefty adapter
dt swiss 240 hubs front and rear
SRAM gxp carbon cranks
wolf tooth 34  T oval chainring
slx 11 42 cassette   
XT shifter and  derailleur
SLX brakes
51mm light bicycle carbon rims
thudbaster Seatpost
 

[Tan4x4]

The frame came today. It arrived in one piece.  Heads up if you order the FLX-FR-701 it does not come with the through axle, you have to source that your self, it is not mentioned on the website. looking forward to building this frame out.

[carbonazza]

Axles are coming quite recently with the frame, before you had to find compatible ones yourself.
Good luck and fun with your build !

[Tan4x4]

Is the picture posting to the site not on anymore?  I was going to post some pictures up of my build.

[carbonazza]

You can upload to imgur.com and select the BBB code between [] tags

Here is an example of the link to an image you can insert in your post:
(img width=800]https://i.imgur.com/cNMDA4K.jpg[/img]

In your link, replace the first ( by a [
I did that to avoid it to show the image here.

[Tan4x4]

Here are the frame and most of the parts for the build.


https://drive.google.com/file/d/1IyyMr5KYobjOr5ehgx_JGtfTwZp6T5_L/view?usp=sharing


https://drive.google.com/file/d/1J1LNqP1r0xLZzO6HW1xRMjgJG6hGKS6Z/view?usp=sharing

[Tan4x4]

Here is the painted frame.
I used a 2 part epoxy primer from Eastwood to start.  Then I used some orange and grey/blue paint from Toyota for the basecoat.  Then topped it with 3 coats of gloss clear. 

primer  https://drive.google.com/file/d/1I5vQ3dbnBnymvywautuMinxt51Y02zKg/view?usp=sharing

orange in the places for graphics  https://drive.google.com/file/d/1I2J80GZBV9vnT39oCtU6o38ri12Ym_WZ/view?usp=sharing

Blue basecoat after tapeing the orange  https://drive.google.com/file/d/1HuecTLAPT3aCABnqNJ6LAl7RUFxQTJZ6/view?usp=sharing

after removing the tape and before color sanding   https://drive.google.com/file/d/1HkpOplYPfZhFj4vpxwtd8_G9QpvIUtg1/view?usp=sharing

                                                                           

[carbonazza]

The "Blue basecoat after tapeing the orange" link is the same image as "orange in the place..."
Did you use cans or an air-gun ?
Have fun with the build!

[Tan4x4]

Cans.   my air compressor is not set up for spraying, just filling tires.

the link should be fixed in the photos.

[cybrsrce]

So... how is it?  Looking at the same frame for a 29+ trail build.  Need some more pics especially with the finished paint

[alex-henson]

Any updates on this build?