Workswell Frames

[Tines]

So almost all endurance frames are under an embargo in europe.
The 306 is not (at least not in germany).
So for me the speeder sc r48d , the workswell 306 and yoeleo r11 are similarly priced. (Around 1.1k eur).
Vb177 is like 400 eur cheaper.
Is there a clear winner?

[Diverse]

306 is under embargo in USA, Thailand, France AFAIK

[Jim.de]

So almost all endurance frames are under an embargo in europe.
The 306 is not (at least not in germany).
So for me the speeder sc r48d , the workswell 306 and yoeleo r11 are similarly priced. (Around 1.1k eur).
Vb177 is like 400 eur cheaper.
Is there a clear winner?

I had a pretty bad experience with Velobuild. I would assume, that the other companys are more professional, have a better customer support etc. I would go for the geo you like the most, after that definately the best looking frame.
What size are you looking for?

[Tines]

I had a pretty bad experience with Velobuild. I would assume, that the other companys are more professional, have a better customer support etc. I would go for the geo you like the most, after that definately the best looking frame.
What size are you looking for?

So szies are ranging from 490-540 because their charts are quite heterogeneous.
I specifically chose these frames because on most i can get to the 400reach with 540 stack recommendation by my fitter. Or at least i can get close. Reach will be achieved by a longer stem and i can easily go a bit lower regarding the stack.
All these frames are more or less the same, on the lighter side and not really aero.


Thanks for your input regarding VB. They are my least preferred option.

[Diverse]

Does anyone know, what exact axles dimension is used in WCB-R-306 frame? Instead of ordering original axles I want to buy a lighter version

[elmtree]

I think I found the US seller of the 306 if anyone's interested: https://boltcuttercycles.com/collections/arpeggio/products/arpeggio-road-frameset-fools-gold-pre-order

[StiffWeenies]

The 8bar Kronprinz Carbon V2 looks like the WCB-R-366

[carbonazza]

The 8bar Kronprinz Carbon V2 looks like the WCB-R-366

Except the very odd brake caliper on a so thin seatstay  , but the picture seems heavily photoshoped anyway.
The 8bar looks like this one too https://www.flybike-asia.com/product/145.html
I tried to get it from Carbonda for me, but it is taken by a brand.

[H143]

i am building up a wcb-r-306 frame with a shimano 105 di2 and 50mm rims
the frame looks good only the seatpost clamp is not my favorite i want to cover it with seatpost cover and have buy a specialized sl7 cover but it is to small,
the seatpost self is not the problem only the wedge is to long for this cover,
does anyone know a cover that fits ?