Chinese Carbon E-Bikes > E-Bike Frames & Builds

Gravel e-bikes?

(1/2) > >>

FullCarbonAlchemist:
I’ve had my eye on something similar to the GT eGrade Current (flat bar, 250w wheel motor and small 250wh battery in the relatively normal sized down tube) for a while, but would consider more of a normal crank type motor and large battery too.

Preference is for something that has good geometry for a flat bar, or an extremely upright drop bar setup; my spine has had it with my current gravel bike which is a fairly upright drop bar. Otherwise pretty standard modern gravel attributes: throughaxles, clearance for at least 42-45mm tires and preferably 50mm+, solid construction, and hopefully compatible with suspension forks like the Fox 32 AX or Rockshox Rudy. Though I’d probably do an initial build with an ordinary solid fork.

atlet:
Did you find any frame and motor?

cybrsrce:
Closest thing I found was https://www.aliexpress.us/item/3256804828954669.html
It doesn't seem to have a lot of clearance but I was considering the with 650b x 40c tires for basic rail trails.  Decided to go with a low end hardtail emtb instead.

Firon:
here are 2 choices

hub-drive: https://lfbikes.com/products/quicksilver

mid-drive: https://lfbikes.com/products/eagle

FullCarbonAlchemist:

--- Quote from: Firon on September 20, 2023, 11:02:32 PM ---here are 2 choices

hub-drive: https://lfbikes.com/products/quicksilver

mid-drive: https://lfbikes.com/products/eagle

--- End quote ---

Interesting bikes, though I can’t find any geometry or sizing.

Navigation

[0] Message Index

[#] Next page