BCd 110 Chainring - any advices

[Nicoloc]

Hi all
I pushed the trigger on a magene P505 powermeter.
Now i'm looking for the chainrings to go with.
any advices on a 52/36 BCd 110 ?
.....and of course a Chiner one  
thanks
Nicoloc

[zxcvbnmjm]

https://www.aliexpress.com/item/1005004259421429.html?spm=a2g0o.productlist.0.0.72cc18feMT3hvF&algo_pvid=e7397e6a-565b-45d2-a976-541c14397e08&algo_exp_id=e7397e6a-565b-45d2-a976-541c14397e08-8&pdp_ext_f=%7B%22sku_id%22%3A%2212000028931378958%22%7D&pdp_npi=2%40dis%21USD%21106.0%2174.2%21%21%211.41%21%21%40210318be16654540578296764ee563%2112000028931378958%21sea&curPageLogUid=1bOjuZp9oqL3

stone is a pretty reputable brand i think. i have one of the 1x chainrings and it works well for me

seems like there are a lot of much cheaper aliexpress options in the recommended listings from $10-30 but i have no idea how good/bad they are

[hazzer19]

Hi all
I pushed the trigger on a magene P505 powermeter.
Now i'm looking for the chainrings to go with.
any advices on a 52/36 BCd 110 ?
.....and of course a Chiner one  
thanks
Nicoloc

Is it a 4 or 5 arm chainring you need? I got a set from ProWheel rings which seem ok so far. I have a Shimano R8000 crankset and although they have a model for that crank I bought one for a 6800 kinda by mistake (listing wasn't super clear either) but I ended up filing down one of the arms to account for the notches they added to the R8000 and it worked fine https://www.aliexpress.com/item/1005002624718033.html?spm=a2g0o.order_list.0.0.21ef1802NGbDiW

[ChrisB]

I had good experience with both Prowheel and Stone chainrings.

On the other hand I had to replace one Zrace chainring that came with the RX crankset after only 1000km.
The replacement from Stone does not show serious wear after 1000km, so much better.

BR
Chris

[chughes]

Something is odd about the quality control for Zrace and Ltwoo (may be the same entity) recently got a power meter that was to come with Zrace but came instead with Ltwoo cranks . Then turns out the spindle instead of being the advertised 110 mm is only 106mm. The shortness caused an issue where the crank was rubbing on the bottom bracket. Supplier tried to convince me its not a defect but simply a change in specs. Sent me a video of 2 Zrace spindles which were both different sizes. The big negatives from all of this is I purchased the power meter since Aug 30, 2022 and based on the eta of the replacement crank, I won't be using this thing before Dec 03 (Negatives of buying direct from China. Seller refused to offer expedited shipping free and charged me 10 usd for replacing the defective cranks (why can't ali express be like ebay in terms of customer service)