Airwolf YFR068 - 2023 Gravel Frame

[electrolux]

My final build, with DIY paintjob.

Elite Edge Wheels
Magene P505 Powermeter
Shimano 105 Di2
Ryet 3D Printed Saddle
Conti GP5000S TR
Ridenow Innertubes

Headset setup:
Specialized Tarmac SL7 and SL8 Headset Bearings Black Oxide ACB495H6.5 Bearings
Specialized S212500016 Tarmac SL7 Compression Ring with Shim

Taken it out on 1 60km ride so far, some small issues but very happy. Slipping seatpost and forgot to charge Di2 battery.

Pretty bad experience with the seller sending a primer painted frame when I requested raw carbon, then took 2 months to resolve through AliExpress. Ended with a $50 refund.

The first fork they sent had a large divet in the carbon, they sent another after some argument.

Wouldn't buy from the seller again based on this.

[Mattpl]

My final build, with DIY paintjob.

Elite Edge Wheels
Magene P505 Powermeter
Shimano 105 Di2
Ryet 3D Printed Saddle
Conti GP5000S TR
Ridenow Innertubes

Headset setup:
Specialized Tarmac SL7 and SL8 Headset Bearings Black Oxide ACB495H6.5 Bearings
Specialized S212500016 Tarmac SL7 Compression Ring with Shim

Taken it out on 1 60km ride so far, some small issues but very happy. Slipping seatpost and forgot to charge Di2 battery.

Pretty bad experience with the seller sending a primer painted frame when I requested raw carbon, then took 2 months to resolve through AliExpress. Ended with a $50 refund.

The first fork they sent had a large divet in the carbon, they sent another after some argument.

Wouldn't buy from the seller again based on this.

How much spacers do you have and which on 2x crank?

[electrolux]

How much spacers do you have and which on 2x crank?

No spacers, OEM 105 Chainrings swapped onto the Magene spider powermeter. They run close but enough clearance and no rub. Shifts perfectly.

[Mattpl]

I also have 105 r7000 and i have 2.5mm i will test without, thanks