Gravel bike project

[vknez]

Arrived few part from bike discount and aliexpress:

https://ibb.co/YWsVZ7L
https://ibb.co/LRJbvMN

[vknez]

https://ibb.co/qYcxdMS
carbon holder for cyclocomputer and front light

Received frameset 2 days ago:

https://ibb.co/6W1P5CM
https://ibb.co/HYPmHrN

[vknez]

Minor problem with inserting seat post. Hidden clamp was probably slightly to big. Vendor sent replacement, but meanwhile i striped black colour from it,  and that was enough to insert it.

[vknez]

Stuck at the progress at the moment, because waiting for handlebar...

https://www.aliexpress.com/item/1005002440079867.html
T47-24(86.5mm)for shimano crank, use the 1mm shim on nds (supplied)

Can this be verified as true info? I can not find proper info about that. Frame is 86,5 mm and I am installing GRX600 2x10 crankset. I got three shims 1/2/3 mm width
Also ordered specific tool for BB T47, 48,5/49 mm width.

[c.etzo]

Stuck at the progress at the moment, because waiting for handlebar...

Can this be verified as true info? I can not find proper info about that. Frame is 86,5 mm and I am installing GRX600 2x10 crankset. I got three shims 1/2/3 mm width
Also ordered specific tool for BB T47, 48,5/49 mm width.

in my direct experience with ultegra crankset and without shims it touch and grinds the BB. with 1mm shim is ok. maybe grx crankset is different. just do a try.
i cant post a pic now, but i can do it later, if you wanna see grinded nds crankarm and bb

[vknez]

I finished my bike and made some 20 km but there is a problem:

https://streamable.com/s82kir

Everything is properly tightened but it is not ok to have such play/woble on bottom bracket.

[TidyDinosaur]

I finished my bike and made some 20 km but there is a problem:

https://streamable.com/p7pz8c

Everything is properly tightened but it is not ok to have such play/woble on bottom bracket.

From what I can see, it looks like the BB is not moving in the frame, so it could be a problem with the bearings maybe?

Edit: just remove the crank and look what is causing this problem. With this kind of movement it should be obvious where the problem is.

[vknez]

I do not understand what do you mean BB is not moving in the frame. BB is tightened. Bearings move. I have removed crank and spindle of crankset have to much play inside BB. Means tolerance on BB is fucked up. I contacted seller but they refuse to warranty that since several month passed from delivery.
I will order new one but avoid Kactus BB cause they are no good.

https://streamable.com/ex7rkn

What to choose??

https://www.aliexpress.com/item/1005005402989291.html    --> From Cwind store which sold me framset
https://www.aliexpress.com/item/1005005548615626.html    --> GUB ceramic
https://www.aliexpress.com/item/1005003015711873.html    --> ZTTO
https://www.aliexpress.com/item/1005005087270051.html    --> Kocevlo

[vknez]

In all this fuss I did not posted final product:

https://ibb.co/0VpXtzZ
https://ibb.co/308qDNy
https://ibb.co/jGQvKDJ
https://ibb.co/ns4ywy6
https://ibb.co/Qb8rw8Q
https://ibb.co/gMG3fTP
https://ibb.co/JvRLvkn
https://ibb.co/2WSHmTH
https://ibb.co/WnxnLLv
https://ibb.co/tm1dwfx
https://ibb.co/km8nDwm
https://ibb.co/3Y1KB16
https://ibb.co/2qJv2qx

[TidyDinosaur]

If you can, just get a BB from a decent brand and not from Ali. My experience with Ali bb's has not been great and I will use Shimano from now on where I can.

[vknez]

I installed this
https://www.aliexpress.com/item/1005003015711873.html?spm=a2g0o.order_list.order_list_main.5.68bf1802WVtcti

This fits GRX600 tight as should. Also do not need 1 mm shim.