Where to buy T47 bottom bracket for Ican Gharo

[dirus]

Hey,

So I went ahead and bought Ican Gharo and ma wondering which bottom bracket should I buy. Its T47 but I am lost and have no idea which one to choose (internal/external..etc.). I hope someone here can help me with suggestions.

[kubackje]

Hey,

So I went ahead and bought Ican Gharo and ma wondering which bottom bracket should I buy. Its T47 but I am lost and have no idea which one to choose (internal/external..etc.). I hope someone here can help me with suggestions.

Token

[Wet Noodle]

So I went ahead and bought Ican Gharo and ma wondering which bottom bracket should I buy. Its T47 but I am lost and have no idea which one to choose (internal/external..etc.).

Maybe add some useful infos (just so that people willing to help do not have to google your stuff for you)? Width of bb shell, symmetric or offset, which crank (determines axle dia and bearing distance)?

[Sakizashi]

Hey,

So I went ahead and bought Ican Gharo and ma wondering which bottom bracket should I buy. Its T47 but I am lost and have no idea which one to choose (internal/external..etc.). I hope someone here can help me with suggestions.

I just took a quick look at their website, and it doesn't tell you what width the shell is. You should ask ICAN what BB to use and confirm the specs.

If its 68mm or 73mm it's likely T47E, if it's 85.5 or 86mm it would be T47i. T47A is 77mm.

[gofasterstripes]

There is quite a bit of info on the Graro thread

https://chinertown.com/index.php/topic,4766.30.html

I bought a Rotor T47 internal BB for mine and it works well with the Rotor 3D30 crank set and the ultegra derailleurs I fitted. I did have to space the crank out a little, I think the frame was designed around the GRX groupset which has a different offset

https://rotoruk.co.uk/v1.asp?prd=262149&cat=1054&ms1=GS1&gad_source=1&gclid=EAIaIQobChMI66iHo7KBiAMVKQ0GAB2kxB69EAQYASABEgIruPD_BwE

[dirus]

Thank you everyone. I asked ICAN and it is T47i --85.5mm.