Xiamen Carbon Speed 10 years anniversary special promotion

[ejump0]

Yes. they could be customized now.

excellent.
Im intersted to know more on/order D50CU-33 T1100 disc in matte.
I have TCR 2021 and Seraph TT912 which can clear my Parcours Chrono 77/86custom (kinda wide).

[pavlo.k]

Finally got my hands on the wheelset and so far I'm happy with it. 65mm rim with 26mm internal with in-house hubs and pillar 1420 spokes weight just under 1500g. The paintless finish looks fantastic. 30mm Schwalbe Pro one measures around 33mm and sits flush with the rim

[Daviddavieboy]

Sorry about this, not sure why I broke this page, I didn't mean to, maybe I was trying to upload pictures. How to fix this?

 I doubt you broke anything. Poor script writing for the website would be my guess.

[c.etzo]

page 8 is dead
the wheels are too light to be on a page 

[Tpower59]

Finally got my hands on the wheelset and so far I'm happy with it. 65mm rim with 26mm internal with in-house hubs and pillar 1420 spokes weight just under 1500g. The paintless finish looks fantastic. 30mm Schwalbe Pro one measures around 33mm and sits flush with the rim

What was the Price for this ?

[Nkearb]

What was the Price for this ?

I got the same spec as him I believe and received the wheels yesterday was $570 shipped to usa and paypal fees.

These are such a nice wheel spec wide, deep and light for the depth and at a good price. I'll probably get some of the D50-36 for my next bike. I was worried about the freehub noise but its not terrible, ali elite wheels hubs I've used are worse.

Peter are you going to do T1100 version of the D50-36?

[PeterXu]

I got the same spec as him I believe and received the wheels yesterday was $570 shipped to usa and paypal fees.

These are such a nice wheel spec wide, deep and light for the depth and at a good price. I'll probably get some of the D50-36 for my next bike. I was worried about the freehub noise but its not terrible, ali elite wheels hubs I've used are worse.

Peter are you going to do T1100 version of the D50-36?

Yes, your wheels are exactly same spec, the only difference is your rims are in matt finish while Pavlo.k's are UD paintless, so your wheels are a bit heavier than his.

Yes, I think we ware going to do T1100 version of the D50CU-36 rims too.

[RiegelundGel97]

Hello,

im considering getting XM-Carbonspeed wheels as well. Are the in house ratchet hubs easy serviceable (e.g. with DT-Swiss upgrade kit or Bearing-Service)?

Ty

[PeterXu]

Hello,

im considering getting XM-Carbonspeed wheels as well. Are the in house ratchet hubs easy serviceable (e.g. with DT-Swiss upgrade kit or Bearing-Service)?

Ty

Yes, you can use the DT rachets and spring washer to replace the original ones on our in-house hubs, beasings too. We just upgrade the bearings on in-house hubs with ENDURO steel bearings today, previous ones are NBK bearings, some clients don't like the NBK ones.

[ejump0]

sup guys. 
im interested with the d50cu-33 t1100. 

i have been running parcours 28mm width with 32mm gp4season clincher on my tri bike(blue) just fine with 4mm clearance of chainstay (the tire is bulbous). 

today i tried to fit on my tcr 2021(green:; have not ridden since new yr as im 100% on tt912) n found out the tire touching the chainstay. 
im planning to make my tcr a touring bike. 

do you think d50cu-33 with 30mm a no go on tcr?

edit:
to those of you having fitted 28mm Gp5k/Pzero 4s clinchers, what width does the tire stretched to?
Schwalbe 30mm seems to go 33mm per recent poster.
i plan to stay tubes

parcours: 22.5mm iw, 28mm ew

[95s10nj]

Hello,

im considering getting XM-Carbonspeed wheels as well. Are the in house ratchet hubs easy serviceable (e.g. with DT-Swiss upgrade kit or Bearing-Service)?

Ty

The front hub bearings are 63802 (15x24x7). The rear hub bearings are 63802 (15x24x7). The freehub has 1-63802(15x24x7) and 1-15267(15x26x7).

[Nkearb]

sup guys. 
im interested with the d50cu-33 t1100. 

i have been running parcours 28mm width with 32mm gp4season clincher on my tri bike(blue) just fine with 4mm clearance of chainstay (the tire is bulbous). 

today i tried to fit on my tcr 2021(green:; have not ridden since new yr as im 100% on tt912) n found out the tire touching the chainstay. 
im planning to make my tcr a touring bike. 

do you think d50cu-33 with 30mm a no go on tcr?

edit:
to those of you having fitted 28mm Gp5k/Pzero 4s clinchers, what width does the tire stretched to?
Schwalbe 30mm seems to go 33mm per recent poster
i plan to stay tubes

So your asking if a rim measuring over 34mm will fit your bike when a 32c tire cannot clear your chainstays? Gonna go out on a limb and say no