Spcycle New Mold SP-R088 Carbon Road Frame

[Xelge]

Ditto, better we meet up for the "Feldbergkönig" - Chinertown Community Ride?

Did that last year so happy to do that again this year 

[Bonus79]

Do you think there would be any issue using integrated bars on the R088? Had ordered TOSEEK bars, that order was auto cancelled, so searching again for a good set.

Have you looked at their HB-05 or HB-053 integrated handlebar?
They don't look bad....even though they don't have flare.

[Bonus79]

I don't remember if it's already been said: what are the dimensions of the two headset bearings?

[Tilmanstoa5ty]

It seems that my frame is shipping soon--did they send photos of the frame on request or automatically?

I requested it in aliexpress chat

[jonathanf2]

I don't remember if it's already been said: what are the dimensions of the two headset bearings?

Both 52mm.

[Bonus79]

Both 52mm.

52mm I guess is the external diameter.....I would also need to know the internal diameter and height, and if they are "flared" or not (internal/external corner).
Thanks

[jonathanf2]

52mm I guess is the external diameter.....I would also need to know the internal diameter and height, and if they are "flared" or not (internal/external corner).
Thanks

They just seem like the off-the-shelf 52mm headset bearings you can get for any AliEx frameset.   

[Bonus79]

They just seem like the off-the-shelf 52mm headset bearings you can get for any AliEx frameset.   

So these could be ok?
https://ztto.net/products/ztto-bike-parts-mountain-bike-bicycle-headset-bearing-only-repair-bearings-for-28-6-44mm-30mm-40mm-steel-41-41-8-47-49-52mm?_pos=3&_sid=ca7ecac03&_ss=r

Because I saw that there are some bearings 7mm high, while others 8mm, or the angles change: the ZTTO model of the link has both 45° angles, other models 36°/45°.

Since in the shop where I work we sell SKF bearings, I wanted to know if we have them too.

[Bonus79]

So these could be ok?
https://ztto.net/products/ztto-bike-parts-mountain-bike-bicycle-headset-bearing-only-repair-bearings-for-28-6-44mm-30mm-40mm-steel-41-41-8-47-49-52mm?_pos=3&_sid=ca7ecac03&_ss=r

Because I saw that there are some bearings 7mm high, while others 8mm, or the angles change: the ZTTO model of the link has both 45° angles, other models 36°/45°.

Since in the shop where I work we sell SKF bearings, I wanted to know if we have them too.

I asked David (Spcycle) directly for information: R088 uses an outer diameter of 52mm, an inner diameter of 39.8mm, a height of 7mm, and an angle of 45° bearings.

At this point I would say that I am almost ready to place the order, I am just waiting for confirmation from my biomechanic for the frame size and the size for the HB-05 handlebar.

In the end I decided to opt for the raw frame to be painted locally.

David confirmed that he can draw up an Alibaba order for me, in this way I can divide the cost into 3 installments.

[Benbenben]

I was hesitating between this and the TT x68, but will most likely go with r088 because of the current sale on Ali. Any recommendations of integrated Bars from Ali as well? Other than hb-05.

[jonathanf2]

I was hesitating between this and the TT x68, but will most likely go with r088 because of the current sale on Ali. Any recommendations of integrated Bars from Ali as well? Other than hb-05.

Besides the slightly different head tube design, it's practically the same thing as the other SL8 clones with some added features and less weight. At the current sale price + coupons it's practically a no brainer. Unless someone really want a fake SL8 bike! 

[Benbenben]

Besides the slightly different head tube design, it's practically the same thing as the other SL8 clones with some added features and less weight. At the current sale price + coupons it's practically a no brainer. Unless someone really want a fake SL8 bike! 

Thank you for the reply.So I guess the below bar would fit?

https://a.aliexpress.com/_mtl3kyJ

[jonathanf2]

Thank you for the reply.So I guess the below bar would fit?

https://a.aliexpress.com/_mtl3kyJ

Every time I've bought Kocevlo bars they arrive damaged, requiring me to return them. I've had much better luck buying from Balugoe. I've bought mainly their ultra narrow non-integrated bars. Though their latest integrated bar looks quite good. I'd go with these in the sub-$100 USD price point.

https://www.aliexpress.us/item/3256808093130044.html

[Bonus79]

Every time I've bought Kocevlo bars they arrive damaged, requiring me to return them. I've had much better luck buying from Balugoe. I've bought mainly their ultra narrow non-integrated bars. Though their latest integrated bar looks quite good. I'd go with these in the sub-$100 USD price point.

https://www.aliexpress.us/item/3256808093130044.html

The handlebar you posted looks interesting....but I don't understand if the headset cover is suitable for the R088 frame which has 52mm bearings.

[Bonus79]

I was hesitating between this and the TT x68, but will most likely go with r088 because of the current sale on Ali. Any recommendations of integrated Bars from Ali as well? Other than hb-05.

I also looked on Aliexpress, and it actually seems to be the best offer on R088 at the moment (even better than Alibaba).
However, I don't understand the adjustment of the shipping/duty costs (I selected Seller's Shipping Method):

"Price Adjustment - Orders shipped from outside of EU with a goods value above EUR150 will be subject to VAT upon importation into the EU. The price of your order has been adjusted to reflect a later collection of VAT at the customs. You are encouraged to confirm the logistics and tax payment arrangement (for VAT, duties, agent fees, etc.) with the seller."

So there will be some duty/tax to pay, or not?