Author Topic: Carbonda Gravel Carbon frame CFR707  (Read 102262 times)

Opadeira

Re: Carbonda Gravel Carbon frame CFR707
« Reply #270 on: December 07, 2024, 02:42:31 AM »
Did you try?
I've got Schwalbe Thunder Burts in that measure 52mm and there's room to spare.

Ok, i tried and they fit but there's not enough clearance to the chain stays, just about a mm (if even that) to the knobs which is not enough. Front fits fine tough
The race Kings measure 55mm on my rims btw

CV

Re: Carbonda Gravel Carbon frame CFR707
« Reply #271 on: December 15, 2024, 11:48:50 PM »
Hi all,

I bought this fully internal frame too and built it up with an Shimano GRX 820 (1x) mechanical groupset with the 10-51 cassette. The build went really easy until I got to adjusting the deraileur...
I can't get it to work properly... It shifts very inconsistent.

Is there anyone with tips to get it to work properly? (Maybe a youtube video I haven't found yet) I am affraid that the cable is routed to tight through the frame :( I used the deraileur outer cable completely through the frame and handlebar.
 
Thanks in advance...

I planned to do that build...hopefully you did get a solution?

nprak

Re: Carbonda Gravel Carbon frame CFR707
« Reply #272 on: May 26, 2025, 11:28:19 AM »
Hi all,

I have (sort of) completed my build with GRX 810 (2x mechanical).
Happy to report the shifting is fine.

I was initially afraid b/c the shifting did not work at all at the start, but after forcefully shifting maybe 50-100 times per shifter, it is now really smooth.
NOTE: when the shifting is stuck at first, just force and go at the limit [lever limit]; the ~0.5-1mm the cable is moving at the other end will make things unstuck after a while