Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - pearl

Pages: 1 2 [3] 4 5 ... 15
31
Sales & Classifieds / Free Velobuild 177 Seatpost Binder
« on: July 26, 2023, 02:55:35 PM »
I was cleaning out the parts bin and found a spare 177 seatpost binder, ill ship it at cost to whoever could use it!

32
I need a 130 bcd sadly… bummer

33
Pat, I noticed you had this ring and are running AXS with it: https://pq-bike.com/collections/130bcd

even though the site says: "Standard 9/10/11/12 speed is available, sram axs cannot"

I guess it works though? I need a 46t ring...

EDIT: Woops see you have the direct mount and it doesn't have that spec, my bad!

34
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-177
« on: July 25, 2023, 08:48:21 AM »
I was cleaning out the parts bin and found a spare 177 seatpost binder, ill ship it at cost to whoever could use it!

35
Sales & Classifieds / Re: SRAM Rival 1x11 and 2x11 Groupsets
« on: July 17, 2023, 08:25:23 AM »
2x Groupset photos

36
Sales & Classifieds / Re: SRAM Rival 1x11 and 2x11 Groupsets
« on: July 17, 2023, 08:22:58 AM »
1x Groupset Photos

37
Sales & Classifieds / SRAM Rival 1x11 and 2x11 Groupsets
« on: July 17, 2023, 08:22:02 AM »
Looking to finish your gravel/road build on a budget, I got you!

Ran this on my gravel bike and works as it should.

Sram Rival 1x Shifters.
Sram Rival Long Cage derailleur.
Shimano 11-46 Cassette.
Sram Rival flat mount calipers (brand new)

-$350 + shipping


----

How SRAM should have built this back in the day. Using the 10 speed MTB Rear derailluer with a clutch is a game changer. Used mostly on the road but ventured into some gravel at times as you can see from the rock chips in the crankset.

-Rival 2x11 Shifters
-SRAM Rival Flat Mount Brakes
-SRAM Force 22 Front derailleur with Chain Catcher
-SRAM GX Type 2.1 Medium Cage derailleur (with clutch), has barrel adjuster included
-Shimano 11-32 Cassette
-SRAM Force 22 50/34 Crankset 175mm GXP

-$400 + shipping

If the crankset doesn't work I can all of this for $350.

Located in Charlotte, NC

38
Just want to come back and reply that Eddy has been very responsive to emails! Trying to research what I can do to run a regular bar/stem and use one of those FSA headsets to have the cables go through the frame...

39
This frame has peaked my interest, any other users running this? Does the price shipped include bars? I’d probably run an external handlebar setup and run through the headset…

40
I apologize, I saw VB 177 + 32c tire in the subject, didn't read farther :(

41
I've mentioned this multiple times in the other thread, 32mm wide is not going to cut it on this frame.

I was very excited to find this as I thought it was a perfect fit, but the tire clearance was a dealbreaker for me. Ended up selling it, I loved it otherwise!

42
Road Bike Frames, Wheels & Components / Re: Velobuild VB-R-177
« on: May 31, 2023, 09:39:54 AM »
32mm tire clearance is great.

This frame won't clear 32mm tire width.

43
I wish was a straight seatpost, I cant do the setback one :(

44
Did a 50 mile gravel race with these, filled with potholes and other big hits to them and they are still kicking. Big confidence booster.

45
So I have about 8 hours between the two handlebars and so far so good. 7 of those hours were road miles (on my all road bike). Minus trying to get my hoods in the exact position I want them to and getting comfortable on them, they have been good.

I rode the ones on my gravel bike on my local MTB trail today for the first time and I was nervous, but they did not let me down either. At first I was concerned but about halfway through my ride I totally forgot about it.

Pages: 1 2 [3] 4 5 ... 15