See likes

See likes given/taken


Your posts liked by others

Pages: 1 ... 7 8 [9]
Post info No. of Likes
Re: LTWOO ER9 & ERX - Electronic groepsets Seen gc performance erx update and teaser of the winspace agile.

So the erx is sleeping @15 secs. With no movement(vibration) of the rear derailleur. It seems sensitive to quickly turn back on. I guess with smooth enough roads it's possible the derailleur could turn off and you can't shift. I wonder how it acts going uphill. When going slow and not that much vibration happening will you get stuck in a gear. Basically any stop would be enough for sleep.  I wonder how he was getting no front shifts but the rear was working.
As of Firmware 0.0.6
July 05, 2023, 08:22:33 PM 		1
Re: LTWOO RX hydro sets Air screw is fine to use.
Here's how used the second (air) screw.

keep the caliper bleed valve closed.
Syringe on the hood bleed screw normally used for the cup.
Open and remove the air screw.
Push fluid from syringe very lightly. 
Fluid will come out of the air hole. So have towel ready.
Put air screw back on. Remove syringe and put bleed screw back on.
Clean any mess.

I have no idea how to use a cup on the bleed hole and open the air screw. 

Remember to unscrew the adjustment grub screw on the level anytime you bleed the brakes. So you fully release the piston to fill the valve. That way you have the best chance of getting the firmest feel. You may still need to tighten up the grub screw.
July 06, 2023, 10:27:18 PM 		3