See likes

See likes given/taken


Your posts liked by others

Pages: 1 [2] 3 4
Post info No. of Likes
Re: Velobuild VB-R-168 Frame I'm sure you thought about moving the saddle to the front with the 80mm?

i have an ergon saddle with approximately 3cm space, that would be enough to compensate, maybe not so good for her knees
in combination with moving the cleats on the shoes i'm sure you get 10mm out
May 06, 2021, 09:23:39 AM 		1
Re: Velobuild VB-R-168 Frame cable have been routed like on the picture iadded

front brake in front of the fork to the right
rear brake on the left side of the fork just a few cm above the front brake cable

turning now is very smooth, just if i turn the handelbar 90° there is a little bit of scratching
May 07, 2021, 01:41:04 AM 		4
Re: Velobuild VB-R-168 Frame First Ride today,
Everything works Fine,
Just some small Modifikations on the shifting

Sram force Etap  is realy amazing, i love ist

Bike ist really fast, 100% recommondation
May 08, 2021, 01:19:13 PM 		4
Re: Velobuild VB-R-168 Frame After the first rides incl. climbs one tip from my side

the handlebar is curved to the front, more than expected after the pictures,
would recommand to take 2 cm shorter stem
May 11, 2021, 02:53:28 AM 		1
Re: Small 26" or 27.5" Hardtail Frame bottlecage has been mounted

drilled two holes in the frame using a self-built template

inserting a rivert nut and tighten it with a self-built tool using a screw and a screw nut

worked very well
May 12, 2021, 01:51:17 AM 		1
Re: Velobuild custom frame painting and decals i ordered VB-R-168 Green Chameleon für USD 50
Painting quality is very goog, no decals
as already stated it's a bit darker thank expected, maybe it's becaus of the matte finish

pictures in this thread
http://chinertown.com/index.php/topic,3147.30.html
May 21, 2021, 02:01:33 AM 		1
Re: Welcome to Chinertown - Introduce Yourself! Hi
Christoph from Austria
just finished my first Velobuild VB-R-168

at the moment building a 26" Hardtail for my 8 year old son,
old frame with parts from Aliexpress,

Thanks for all your hints and advice, try to give back as much information as possible
not only on parts and frames, also on clothing and how to build

br christoph
May 26, 2021, 06:03:50 AM 		1
Re: TT extensions for integrated carbon handlebar? maybe this coul work
https://www.payszpz.cf/ProductDetail.aspx?iid=23204220&pr=72.99

to mount on the stem, but not sure if this really looks good,

there is also one von syncros, but very expensive
https://m.biker-boarder.de/syncros/1870849_pa.html
May 26, 2021, 06:29:43 AM 		2
Re: Velobuild VB-R-168 Frame i took sram dub Presse fit bb86 road
very easy to pressen in
May 26, 2021, 02:02:50 PM 		1
Re: TT extensions for integrated carbon handlebar? if you can print something you could use the screws on the downside of the handlebar (normaly used for the computer)
May 27, 2021, 01:23:02 AM 		1