See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: LTWOO RX hydro sets
Quote from: 00Garza on August 03, 2023, 07:30:31 AM
I’ve been wondering this as well. I get the mech dialed in and a few rides later its off. Not terribly, but noticeably. Contemplating upgrading to some jag wire cable. Surely a better cable will help with shifting.

I just installed the GRT and had poor shifting, hard shifting and inconsistent indexing. I have the carbon version of the GRT 1x12 and initially there was so much resistance when shifting the rear that I thought the shifter would break. I found the problem, the hardened steel cable guide that the cable travels thru on the rear derailleur is not beveled/radius-ed like they are on my Shimano derailleurs. As delivered the cable has to ride over a hardened steel 90 degree sharp edge. I took my dremel tool with a diamond bit and added a radius and now my shifting is more consistent and easier. I no longer feel like the shift paddle is going to break. I really can't believe that this is designed so poorly. The picture below shows the problem area after I gound down the sharp edge, I didn't grab a before picture.
August 14, 2023, 11:17:50 AM 		2
Re: Spcycle New Mold G056 Carbon Gravel Frame Attached image shows 6mm gap between frame chainstay and 42t chainring. I don’t know if 44 would fit for sure but I suspect it would.
November 09, 2023, 07:48:37 PM 		1