Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: Syncros Fraser iC SL / Scott Spark 900 handelbar 90$ instead of 399$
OG-Evkin that make really fine carbon components.Looks great indeed!! They might want to reconsider the title "king of manipulation" though  and I love the XXX marking at the spot where it's supposed to break 
January 19, 2021, 07:25:01 AM |
1 |
|
Re: Fovno Crank sets
Did the same on my Fovno Ghost crank, the "do not disassemble" bolt wasn't very tight either, with 47 Nm it went 3/4 turn further in. Afterwards no issues with BB width 96.7 mm, rotates nicely.
January 30, 2021, 02:34:39 PM |
1 |
Re: Lightcarbon LCFS937 Build
Finished my build and did the first two rides. Thanks to all contributors on this thread! Super happy with the result. Came in at 12.9 kg, even though my list said 13.2. Maybe I forgot something?  Frame is 19", 2487 g with hanger and the supplied damper bolts (without axle and saddle clamp). No issues at all with the frame and hardware, fit and finish is good. Bearings seem very good, all MAX type with plenty of grease inside. Didn't like the fact that the trunnion bolts clamp the damper firmly to the frame, so with bolts tightened, no movement is possible. As a workaround I inserted a couple washers into the blind holes in the trunnion, so that the bolts are tightened against the bottom of the hole and not against the frame. This way, the damper can pivot freely. Still not a "good" solution, but better than nothing. I am constantly checking the bolts... Rides great, sort of pushes me to go faster on uphills, even though the powermeter data doesn't show a noticeable difference compared to my previous 27.5" all mountain... Need to dial in the damper (Fox DPS), so I borrowed a ShockWiz  . Actually I planned to use a damper remote, but noticed that I can reach the damper lever quite easily. So I guess I won't bother I noticed that Lightcarbon measures the stack to the axles, not to the BB. So you need to add the BB drop to compare to others... February 28, 2021, 01:44:00 PM |
2 |
Re: Lightcarbon LCFS937 Build
Budget Rear shock .....?seems aliexpress is out of Fox DPS shocks. Bad luck... check the classifieds. I bought a lot of my parts from classifieds, including the Trust fork. Check aliexpress for parts like crank, cassette, stem etc. Typically ztto official store is a safe bet. April 23, 2021, 08:51:38 AM |
1 |
Re: Lightcarbon LCFS937 Build
Hey Bro and Guys im trying to choose ideal size....my present bike matched to this frame would put me in 19" frame choice however i initially was gonna order the 20.5 frame...my thinking now is that's too large as my Trek Superfly was extra large at 21"...a 2012 model....I'm 6' with short legs and could JUST fit the 150 mm Reverb B, the hose does a very sharp corner though. Would not work if it was a bowden... I have a 19" frame, I think it fits me perfectly. April 28, 2021, 01:58:32 PM |
1 |
|
Re: **Haideli Customer Appreciation FM-M009 Hardtail Frame GIVEAWAY!**
enter
September 04, 2022, 04:05:01 AM |
1 |