See likes given/taken
Post info | No. of Likes |
---|---|
Re: LTWOO RX hydro sets
You can get 600 shifters, 810 derailleur (42t) and callipers for 440 at bike24
January 27, 2023, 01:39:02 PM |
3 |
Re: ZRace Disc Brakes
How are everyone's BR-05 callipers holding up? I am really regretting buying mine... They have been performing worse and worse as time goes by. They actually only performed good the first few weeks. On yesterday's ride i had almost no braking in the back and the front brake was really pulsating. The front fork was vibrating a lot... I have taken them off yesterday evening, bled them and replaced the pads even though they were not worn out. I am regretting spending the money on them and am contemplating just getting GRX800 shifters/brakes/derailleur. Edit: Well I decided it is time to stop being frustrated with these dangerous Chinese brakes and started to order the GRX 800 parts... Should be around 400eur for the GRX 800 brifters 812 derailleur and I found some unused cheap 105 calipers to go with that... February 06, 2023, 03:23:25 AM |
1 |
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
Great finds. Been noticing this trend on Amazon and eBay. Is it that Ali-ex is getting expensive or Amazon cheaper? Nothing beats Amazon's convenience. Placed an order for cassette. I would have ordered the ospw too but there's no R6800 compatible one on sale. Ali has gotten A LOT more expensive in the last few years (50-100% more)... Free shipping has also become more and more scarce... February 06, 2023, 01:01:03 PM |
1 |
Re: Flyxii FE-02 Build
Which Ltwoo Rear mech are people considering? I've got a full 105 hydro set to transfer but wanted a bigger rear cassette (11-40) what should I consider? Just stay with shimano. You can get a GRX 812 rear derailleur. February 10, 2023, 12:40:39 PM |
1 |
Re: Another Seaboard GR02
Very nice bike. Just saw your post on Reddit with someone replying you are certainly going to die
February 16, 2023, 12:59:01 AM |
1 |
Re: Flyxii FE-02 Build
ZNIINO bars came in today. Look good and feel plenty strong enough. One step closer to having to pick a drivetrain. Be careful tightening the stem cap. I cracked that handlebar with that... February 16, 2023, 07:22:05 AM |
1 |
Re: Rinasclta Granite Aero "All Road" Bike Frameset
Never mind, I found your story about the painting process. Maybe sanding with 1500-2000 was a little too fine for the primer? I found this: "600 to 800 Grit – This sandpaper grit range is perfect for sanding surface imperfections in the primer, prior to paint application. It is recommended to start at the low grit end and work your way up to 800 grit. " https://sandpaperamerica.com/blog/the-correct-sandpaper-grits-for-sanding-car-paint/ February 22, 2023, 07:34:55 AM |
1 |
Re: Rinasclta Granite Aero "All Road" Bike Frameset
So the frame is actually split in half between two different colors Thanks man. Do you happen to have some close-up pictures of the frame so we can better see how it turned out? February 23, 2023, 03:18:34 AM |
1 |
Re: Rinasclta Granite Aero "All Road" Bike Frameset
Etoe advises about 10min. Do not let it dry! When it's dry he says you have to sand before the next layer.
February 25, 2023, 07:12:54 AM |
1 |
Re: Chasing Wind GT20 Gravel Frame build
Thats a critical area of the handlebar, which is a critical area of the bike itself. The stem will put a lot of stress there from clamping on. That's the last place you want to weaken. Indeed. I had a similar handlebar and after tightening the faceplate of the stem there was a very small crack right next to the faceplate (could even have been the paint...) and I scrapped the handlebar. You are already taking a gamble with these handlebars. No need to try your luck any further... March 07, 2023, 04:44:11 AM |
1 |