Chinertown
Other Resources => Vendor Discussion & Reviews => Topic started by: nick_n_ii on September 19, 2015, 09:32:56 PM
-
Figure I'll ask first.
Who makes a 29er HT or FS that uses the straight 1 1/8 head tube? I already have forks for this size (100mm travel).
-
As I know, no one in China manufactures frames with straight 1-1/8'' head tube. You can order the frame with tapered 1-1/8'' - 1-1/2'' head tube, you just need an adaptor bearing that convert your straight fork to tapered version.
-
I did not know there was a adapter bearing I could get. I might be in the market for a new frame sooner than later.
-
Maybe you need something like this:
http://www.bike-discount.de/en/buy/hope-reduction-taper-1-1-2-to-1-1-8-31487/wg_id-491
-
Cane Creek uses the same lower cup and bearing (whatever size fits the frame) whether you have a tapered steerer or a straight one. The only difference is the lower race. I actually have a spare one that I used briefly with a straight steerer and 1.5" head tube until the new fork came in a month or so later. They are around $12 if I recall correctly.
-
Cool, thanks all for the help on this.
I was having issues fitting new fork cost into my build plan. This will make it alot easier now.