See likes given/taken
Post info | No. of Likes |
---|---|
Re: Carbonda fm936 Thoughts
Arghh...finding a creak resulted in changing and/or servicing bearings, checking bb and check hubs, but without cluck. The first time two years ago it was because of a to long bolt (lower bearing) which resulted in a new rear tringle from carbonda. Second time it was due to a stuck bearing. Third and fourth time my hub was broken... But now... Don't know it is there. Seems a crack in the frame, not only cosmetic. And no, I didn't fit a to big bolt in there. Hopefully Adam from Carbonda can help me August 25, 2022, 12:16:18 PM |
1 |
Re: Carbonda fm936 Thoughts
Think something impacted there? I'd guess thats why a chunk is broken off and the crack extends from that.. depending what Carbonda says, I'd sand away and see what it looks like under the paint. That's what I'm planning to do. But repair will not be cheap... August 25, 2022, 02:05:19 PM |
1 |
Re: Carbonda fm936 Thoughts
adam confirmed, crash impact no warrenty. So new rear is on his way...with also a Fm1002 size medium I did asked Adam about the new 120mm rear end, ot will be coming end of the year with what I understand a new linkage. August 31, 2022, 02:19:39 PM |
3 |
Re: FM1002 / FM1166 - 150mm frame
Thanks for your info. Just want a bike next to the 936, not overlapping to much. After couple of emails with Adam, I'm now waiting on a size medium Fm1002! Hard to choose which shock...dvo topaz, rs super deluxe, fox or manitou or even a sr suntour triair3. Any Ideas? Front will be 160mm lyric or dvo diamond I think if I could get it a bit cheap. Fox 36 grip2 would be great but to expensive. Rest will be slx drivetrail I think wit 4pots slx or so brakes. Already got 30iw Nextie AM carbon wheels. Stoked August 31, 2022, 02:28:18 PM |
1 |
Re: Carbonda fm936 Thoughts
How much did the rear cost? 300us excl 65us transport August 31, 2022, 03:08:32 PM |
1 |
Re: **Haideli Customer Appreciation FM-M009 Hardtail Frame GIVEAWAY!**
Enter
September 07, 2022, 04:40:40 PM |
1 |
Re: FM1002 / FM1166 - 150mm frame
Yeah the small bump compliance on the DPX2 is bad. Honestly the lyrik's small bump performance isn't very good either. Still both a very supportive, big drops feel plush while bumpy green trails feel shakey. According to serveral reviews the lyric should be fine for small bump compliance, but needs some tweaking. Adding some tokens and lowering pressure can help with small bump, but could also make the fork more progressive. Not tried myself, because havent't got the yet nor the fork. Good luck. Ps alternatives with excellent small bumb: the new fox 36 and offcource dvo diamond or onyx September 14, 2022, 02:55:18 PM |
1 |
Re: FM1002 / FM1166 - 150mm frame
Does anyone else have chain damage like this? Looks like its about to eat into the carbon. What should I do? Very change spot for chainslap i would say. Your chain ist to long or the clutch is to soft are the 2 things I think of. Because it's near a pivot you can try to put some 3m helicoptertape or something similar. Good luck September 21, 2022, 11:48:27 PM |
1 |
Re: FM1002 / FM1166 - 150mm frame
Being quiet here...but good news. Received my frame today...with a scratch on it
October 03, 2022, 03:28:57 PM |
1 |
Re: FM1002 / FM1166 - 150mm frame
I had my first ride yesterday on the fm1002 at our flat Netherlands. Build with a 160mm lyrik ultimate, rs superdeluxe ultimate, slx groupset and nextie carbon wheelset with speci ground controll/vittoria meczal. Must say doesn't bike that bad. Noticable steep seatstay when on the flats. In comparison to my fm936 not nearly as direct when on the paddles. But what I didn't expexted to be it so nimble, it goes true turns very easy. Also the medium is a bit smaller than the fm936, a large could had fit me also with 1.74 tall. I think it will rock when I use it in the Alps But when I'm going to do a lot of km's or climbs like a transalp I probelably take the fm936. . December 03, 2022, 01:09:52 PM |
6 |