Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - drummercat

Pages: 1 [2]
16
29+ & 27+ / Re: Carbon Speed 2017 27.5 plus FS frame CS-FS27
« on: June 22, 2017, 07:58:31 AM »
There are 2 holes under the shock, which is the routing for dropper seatpost I suppose. So there is no cable routing for lock out of rear shock I think. (The BB shell has no holes going up.) The 2 holes for dropper under the shock are not facing each other so its quite difficult to install. Finally I drill 1 extra hole 1 inch closer to the shock.
Also I open some more ports for fully internal routing of the rear brake.

Quote from: Carbon_Dude on June 22, 2017, 06:05:27 AM
Looks nice!  Is there cable routing for a remote lockout for the rear shock?

17
29+ & 27+ / Re: Carbon Speed 2017 27.5 plus FS frame CS-FS27
« on: June 21, 2017, 09:07:47 PM »
Here`s mine.

Frame: FS27 M size
Shock: fox ctd non kashima 2014 165x38
Fork: Rockshox reba 120mm 29er
Crank: Raceface Next SL G4 with blackspire 30t chainring.
Cassette: X01 11s
Shifter:X01 11s
Rear Derailuer: X01 11s
Wheels: sram roam 50 with wolftooth boostinator 148 adaptor
Tyres: specialized gc 2.1 front and schwalbe nobby nic 2.2 rear (both will be replaced to ikon 2.3 and 2.2. Soon)
Brakes : XTR m9000
Seatpost: Brand X ascend dropper 120mm
Bar: Crank Brothers Iodine 3 730mm 8mm rise flat top(as I remember it is)
Stem: Deda 65mm
Grip: foam grip.
Saddle: SDG Fly solid Ti rail
Pedal: Shimano SPD

My scale shows 24.97lb for the current setting, I have some carbon bars and will replace the CB alu bar soon, also considering Ti axle pedal too..... Hope it will be 24.5 finally.



18
29+ & 27+ / Re: Carbon Speed 2017 27.5 plus FS frame CS-FS27
« on: June 21, 2017, 08:53:58 PM »
I dont think a ccdb inline will work...the space between rocker link and seat tube is too close. The comp/ rebound adjustment assy will hit the frame I think.

The upper shock hardware is 8x22 , lower should be 8x50 but it supplied shims to use with 8x22 too. The 22mm hardware will bent the 50mm length 8mm inner shaft if you bottom out hard I think.

I just built mine yesterday....will post pics soon.

Quote from: ReverendRockRazor on June 19, 2017, 06:07:06 PM
I just bought this frame I will be running cane Creek dbinline.
Can someone please link me a source for all the mounting hardware bushings bolts etc that I will need?

 Or if someone knows a source for the fox shock that is stock on the spark that would be an option too.

Pages: 1 [2]