See likes

See likes given/taken


Your posts liked by others

Pages: 1 [2] 3 4 5
Post info No. of Likes
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) The HA on the Carbonda says 69 so I'd cross that off straight away. I'm building an Ican p9 with 180front and 150rear, I'd weigh around 105kg, frame seems well built and strong but I've no real world experience yet.
June 26, 2021, 09:06:58 AM 		1
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) Yeah, I'm 6 foot on the dot and the large seems perfect but any taller would be an issue I'd say.
June 26, 2021, 09:17:11 AM 		1
Re: High Bodyweight Frame Selction (Flybike FM1266 & Carbonda FM356) Could definitely fit a 2.6 on the back, I've a wtb 2.4 at the moment and there's loads of space
June 27, 2021, 07:14:01 AM 		1
Re: ICAN P9 build I got a 2021 lyrik ultimate with 42mm offset, I take it the smaller offset will make the wheelbase slightly shorter and easier to turn in to corners.
June 28, 2021, 04:14:39 AM 		1
Re: ICAN P9 build Build is finally finished, been a long year of getting the parts I wanted together with the shortage on parts/brexit. Needs a few good test runs to see how well/badly I put it together :D but it feels lovely, feels quite slack actually, I'll have to see whether ill keep it at 180 or reduce it, I figure the HA is somewhere around 64 at the moment with the increased fork travel and 1 degree offset bushings in the shock (which fixed my issue with play).
July 07, 2021, 12:12:12 PM 		5
Re: ICAN P9 build .
July 07, 2021, 12:12:53 PM 		1
Re: ICAN P9 build Took it for its first spin today, climbs better than I thought it would tbh, not a great climbing bike or anything but it gets you there (although funnily enough I got a PB on the main climb), the 28t oval ring up front probably helps a lot. Lockout on the storia shock is lovely too.
The descending is going to take some getting used to  ;D this is my first 29er and it has made all my tricks for getting around awkward features on the trails absolutely irrelevant, I fully understand the term monster truck now. Scary the speed it carries once going, and that shock is just buttery smooth, hitting top 3 in my Strava times on my first runs.
So far, really really impressed. Heading out again tomorrow on it.
July 08, 2021, 03:28:59 PM 		3
Re: ICAN P9 & Rockshox Super Deluxe Coil RCT (Bushings) Frame looks amazing, love the paint scheme, recently finished my build and the shock bushings caused me a bit of trouble as everything I had read told me in needed 22x8mm top and bottom, this worked with the included (with Ican hardware) bushing spacers but I had a small it of lateral play.

I then bought 30mm x 8mm top and 25.4mm x 8mm bottom to install without the spacers and it's been perfect so far. I bought my bushings from https://www.offsetbushings.com/ with a 1 degree offset to slacken the bike a bit. Been riding it for around 3 weeks now and everything is going good. Best of luck with the build.
July 27, 2021, 08:16:08 AM 		3
Re: Carbonda FM 1003 / Flybike FM 1266 180mm "Super Enduro" Biggest issue with the design.....no bottle cage mount :D
August 21, 2021, 04:31:56 AM 		1
Re: ICAN P9 build It's a dropset 2 in silver,  https://chrisking.com/products/dropset-2
August 30, 2021, 10:40:24 AM 		1