See likes given/taken
Post info | No. of Likes |
---|---|
Re: 29er XC Hardtail - Boost - Modern Geometry
Found something a bit more fancy from Winow: I just found it on Ali, very nice frame but only in size M for the moment : https://www.aliexpress.com/item/1005003614935191.html?spm=a2g0o.productlist.0.0.1139191cXDcjJx&ad_pvid=202111300109029926768664505920007477368_3&s=p December 01, 2021, 01:35:31 AM |
1 |
Re: Spcycle 2023 New Travel 120mm Super Light 29er full suspension frame
Biggest issue I have with it is the headset cable routing. I won't build a bike with that garbage. Head angle could be a degree more slack, but since it has headset routing I am out either way. May 05, 2023, 03:02:22 PM |
1 |
Re: SP-Cycle M06 build thread
done, I think.
September 30, 2023, 07:53:43 AM |
1 |
Re: Lightcarbon LCG071-D Build
Gentlemen, could anyone measure the front/rear clearance with your tyres, please? I wonder how thick I can go. And if there is a room for fenders. I measure about 65mm between fork and 64mm between stays, so 50mm-ish is probably max (IE 47mm). November 12, 2023, 11:26:48 AM |
1 |
Re: SP-Cycle M06 build thread
The 55mm chainline looks real measured with a 3mm off set. However at this offset and with 32t ring I seem to have some rubbing under load condition as my frame is scuffed at the chainstay/ring area. And there is no way you can go bigger than 32t with 3mm offset, or I put the bike together wrong, which is entirely possible lol I’ll add pictures later tonight. March 21, 2024, 06:43:01 PM |
1 |
Re: SP-Cycle M06 build thread
See the pics, I didn’t resize as some may want to have the zoom in The chain pick is on 7th cog (1 being smallest) March 21, 2024, 10:17:34 PM |
1 |
Re: Spcycle New Mold G068 Carbon Gravel Frame
Why not make the tire clearance 50mm or more? That is what a lot of people want. Please!
April 15, 2024, 10:59:47 PM |
1 |