See likes

See likes given/taken


Posts you liked

Pages: [1] 2 3 ... 10
Post info No. of Likes
Re: Light Carbon FS713 build planning My build
March 19, 2020, 05:51:55 PM 		1
Re: LCFS911 full suspension
Quote from: StefanB on August 10, 2020, 02:08:04 PM
Hi. Has anyone built the LCFS911 as a mullet with 29" on the front and 27.5" on the rear? Will the geometri be crazy or will it work?
I think the geometry would work perfect with 100mm front travel mullet. 110mm might put it too big in the front for what it was designed, but I imagine it would still work as well as most other solutions.
August 17, 2020, 09:03:46 AM 		1
Re: TanTan FM10 29/27.5+ Finally received my frame and got it all assembled.  Overall it looks great.  However, they still didn't really fix the shock interference issue if you are running a 200mm shock.  They added a bit of clearance that helps when the shock is full extended, but as it compresses and the linkage rotates it still hits.  I used a Grinder to remove a small amount of material to add the needed clearance.  I think it should be good now.  I will update after getting some miles on it. 
September 11, 2020, 09:55:44 AM 		1
Re: TanTan FM10 29/27.5+ Hi! I received the frame as well, and I finally had time to assemble the bike. I am quite happy with the result. The frame color I chose came out cool too, this was a bit a risk I took. I had some minor things I had to fix when I assembled it, such as shorten the spacer bushings for the rear shock on a small lathe, so that I could get my DVO shock fitting in. I also removed all the bolts from the frame and added a bit of the blue loctite to make sure they won't get loose. And I used a torque wrench, because some screws were obviously loose! So, here it is, check the pic of my build attached! If you have any questions, feel free to ask.
September 12, 2020, 03:43:41 AM 		1
Re: LCFS911 full suspension Looks great @StefanB!

Finished my build up and have 4 rides in on it now. It's my first mtb since I was in highschool with 26inch wheels haha. The 29er wheels are crazy, can just roll over anything. Although for really technical rocky trails I might be a little concerned about bottom-bracket clearance with smaller wheels. I had quite a few pedal strikes, but it is probably also my terrible technique.

350MB wheels from lightcarbon
Lightcarbon bar + headset
Magura MT5 + Shimano mt200
zitto stem
sram eagle sx
random cheap amazon aluminum pedals
aliexpress saddle
rock shox monarch rl 165x38
rock shox sektor 120mm
aliexpress zoom dropper (too long for me haha, at least it was cheap), replacing this with a oneup v2 120mm that's in the mail.

Biggest problem I ran into is the magura caliper not fitting in the rear triangle. I was planning on printing/machining my own bracket to move the mount to somewhere better. But my temporary shimano brake is just so much easier bleed I'm considering just switching to a higher level shimano system. The magura bleed process (at least for mt5 style) is awful and makes a mess.




October 01, 2020, 09:34:13 AM 		1
Re: New Enduro Frame FS830
Quick Details

Combo Set Offered:
    5

Material:
    T800 Full carbon fiber

Foldable:
    No

Size:
    29er* 15''/17''/18.5''/21'' ( only 17'' available now)

Use:
    Mountain Bikes, suspension bicycle

Weight:
    2620+/-50g(17'')

Place of Origin:
    Guangdong, China

Brand Name:
    HAIDELI

Model Number:
    FS830 Enduro

Surface Processing Mode:
    matte/glossy

is_customized:
    Yes

Type:
    Carbon fiber frame

Model type:
    29er Enduro MTB suspension frame

Bottom Bracket:
    BB92

Frame travel:
    160mm

Fork travel:
    170mm

Rear Brake:
    post mount 200mm

Headset:
    1 1/8 to 1 1/2"

Seatpost:
    31.6mm

Suitable crankset:
    30/32/34T

Max tire size:
    29er*2.4'' tires

Rear shock:
    210*55cm



** This is copy-pasted directly from the Alibaba link above. **



Model NO.    Enduro-FS830
Size     

29er* 15''/17''/18.5''/21'' ( only 17'' available now)
Travel     frame travel: 160mm, fork travel: 170mm
Max tire size     29er/29er boost*2.35'',  27.5er plus*3.0'' tires
Rear shock CC    

210*55cm
Brake type     post mount 200mm
Thru axle size     148*12mm
Cable Routing    Internal Cable
Suitable crankset    30/32/34T
Weight    at least 2620g+/-50g (17'')
Bottom bracket      BB92
Max tire size    

29er*2.4'' tires
Headset Tube     1 1/8 to 1 1/2, Tapered
Seat Tube      31.6mm 
Including    frame+clamp+headset+BB+thru axle shaft (excluding shock absorber)


** This is copy-pasted directly from the Alibaba link above. **
October 09, 2020, 03:29:26 AM 		1
Airwolf 29er Full Suspension Build I Have decided to go with an Airwolf 29er Dual Suspension Build, to replace my 12 year old 26 hardtail.

Parts list
Airwolf Dual 29er Carbon Frame
X-Fusion Slide 34 Fork
Shimano SLX M7100 Brake
SRAM NX Eagle Groupset
Sun Ringle 29 Rims with FastRace Hub
X-Fusion RL Shock
Satori Dropper Seat Post
NECO Head Set
KRSEC Stem
WTB Saddle
Continental and Bontrager Tubeless Tyres
October 14, 2020, 01:11:48 AM 		1
Re: Airwolf 29er Full Suspension Build the bike is now finished. i am pretty happy with it, this is my first full suspension ride, i was worried about peddle bob, but it is almost non-existent. the frame seems to hold up for now. let's see how it does long term.
the whole bike weighed in at 13.5kg.
October 14, 2020, 10:47:09 PM 		1
Re: LCFS 958 build help Here is my build
November 17, 2020, 03:45:37 PM 		1
Re: LCFS911 full suspension Just did the final shakedown. Very happy with the feel and power delivery.
Specs:
Fox shock (Trek Top Fuel Takeoff)
SRAM XX crankset + Quarq Power Meter
XO1 AXS Eagle 12 speed mini Group
SRAM Level TLM brakes
Amazon $20 disc rotors (fantastic)
Light Bicycle RD934-TR Carbon rims
Profile racing Hubs (USA made)
EThirteen 9-46 12 speed cassette
Following parts from Scott Spark takeoff:
Rockshox Sid 100mm fork Boost
Syncros Carbon Seatpost, Bars, stem
24.5lbs with pedals & Wahoo mounted
Size 19”
Took approx 2 months from order (Nov 20, 2020) to delivery
About $3500 invested combination of new and used parts
January 17, 2021, 06:17:22 PM 		1