Chinertown

Chinese Carbon MTB => 29+ & 27+ => Topic started by: joeleo2000 on October 04, 2018, 09:38:00 PM

Title: ICAN P9 Axle Size
Post by: joeleo2000 on October 04, 2018, 09:38:00 PM: Need help on axle dimensions for an ICAN P9 frame.

I bought the ICAN P9 and had them paint it in a gloss red. Stupid me, I didn't think to buy an rear axle from them. So now trying to figure out axle length, thread pitch, and thread length. Anyone know the exact dimensions and what axles are other P9 owners using?
Title: Re: ICAN P9 Axle Size
Post by: Carbon_Dude on October 06, 2018, 03:59:02 PM: Can you email the place you purchased the frame from?

Most likely it's just a standard 12x148 Boost axle.
Title: Re: ICAN P9 Axle Size
Post by: joeleo2000 on October 07, 2018, 08:52:48 PM: www.icanbikes.com (http://www.icanbikes.com)

There really isn't a standard boost axle. There are many different lengths, thread pitch, and thread length.
Title: Re: ICAN P9 Axle Size
Post by: joeleo2000 on October 10, 2018, 10:05:18 AM: Well I answered my own question. After trying a few axles, the one that fits the Ican P9 is 172mm length, 1.5mm thread pitch, and 20mm thread length.
Title: Re: ICAN P9 Axle Size
Post by: YEEPYEEP on December 24, 2018, 07:29:07 AM: Quote from: joeleo2000 on October 10, 2018, 10:05:18 AM
Well I answered my own question. After trying a few axles, the one that fits the Ican P9 is 172mm length, 1.5mm thread pitch, and 20mm thread length.

Hi could you link us where you purchased the axle or what models i can get? thankyou
Title: Re: ICAN P9 Axle Size
Post by: tripleDot on December 24, 2018, 07:34:45 AM: Shouldn't the thru axle be included when you got the frame?
Title: Re: ICAN P9 Axle Size
Post by: joeleo2000 on December 28, 2018, 12:13:24 PM: Quote from: YEEPYEEP on December 24, 2018, 07:29:07 AM
Quote from: joeleo2000 on October 10, 2018, 10:05:18 AM
Well I answered my own question. After trying a few axles, the one that fits the Ican P9 is 172mm length, 1.5mm thread pitch, and 20mm thread length.

Hi could you link us where you purchased the axle or what models i can get? thankyou

I used this axle
Salsa Deadbolt Ultralight Thru-Axle 12mm x 174mm x 1.5TPI, 20mm Thread
https://www.jensonusa.com/Salsa-Deadbolt-Ultralight-Thru-Axle (https://www.jensonusa.com/Salsa-Deadbolt-Ultralight-Thru-Axle)
Title: Re: ICAN P9 Axle Size
Post by: joeleo2000 on December 28, 2018, 12:20:51 PM: Quote from: tripleDot on December 24, 2018, 07:34:45 AM
Shouldn't the thru axle be included when you got the frame?

My frame came with a plastic holder where the axle would be.
Title: Re: ICAN P9 Axle Size
Post by: tripleDot on December 28, 2018, 06:39:33 PM: I got 2 TA frames from Carbon Speed (boost & non-boost) and both came with the plastic TA protector and their respective TA skewer. My friend had 3 bikes (branded) and all came with a TA skewer. All the bike shops here that I have talked to says the frame should come with their TA skewer. You might want to check with your vendor.
Title: Re: ICAN P9 Axle Size
Post by: YEEPYEEP on December 29, 2018, 10:18:17 PM: I spoke to melody and she said that it only comes with wheels sets but in our previous messages during the order, a thru axle was included..... i also got a plastic piece in between