Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: OGGI Cattura Pro
Looks like the Carbonda FM909 to me. I have that frame and will be building it this winter. Looks good built up. My bad. Anybody seen where I left my glasses? November 29, 2022, 09:42:09 AM |
1 |
|
Re: Carbonda FM909
https://www.facebook.com/344264558942333/posts/pfbid02cn442XBzVdUVxLmNW5ZKHNhWJvCPCQsTukbvSgVq8aKprjK2NWnwSEytZ16XHaHsl/?sfnsn=mo December 07, 2022, 11:27:01 AM |
1 |
|
Re: FM1001 / FM1156 - 135mm frame
The saddle cuts your height in two. Your torso and arm length define more the size of the frame you need. Your inseam will only make the vertical drop between the saddle and the bar. So for the same height, shorter legs may need a L. While longer legs will need a M. January 02, 2023, 03:02:33 PM |
1 |
Re: Carbonda fm936 Thoughts
You didn't give us the most important information. Maybe 1 or 2 grams  Due to the removal of the blue spacer out of the rock shox ultimate deluxe rct  The linkage weight is equal. HA = 65,5 ° (measured with digital pitch gauge) The last picture shows the new cheap areo wheelset  January 25, 2023, 10:52:03 PM |
1 |
Re: Syncros Fraser iC SL / Scott Spark 900 handelbar 90$ instead of 399$
Any more reports on either the Ullicyc or OG-Evkin bars? Thinking of ordering one, just wanted to see if there's any more feedback before pulling the trigger. A few months later, I'm still in one piece riding the OG-Evkin bar
January 27, 2023, 07:45:13 AM |
1 |
Re: Carbonda fm936 Thoughts
I can confirm that two bottles fit quite well in a large FM936 frame! Thats basically my setup. I run two full size bottles in my L frame, only real difference is I machined my adapter out of aluminum and attached it with a Wolftooth extension January 27, 2023, 01:39:20 PM |
1 |
Re: Syncros Fraser iC SL / Scott Spark 900 handelbar 90$ instead of 399$
Any more reports on either the Ullicyc or OG-Evkin bars? Thinking of ordering one, just wanted to see if there's any more feedback before pulling the trigger. 6+ month review, other than needing lots of carbon paste they have been working great. I have two of this ULLICYC model - https://www.aliexpress.us/item/2251832780997911.html since 11/2022. One on a 140/140 trail bike and the other on a 29+ carbon rigid. June 06, 2023, 02:58:23 PM |
1 |
|
Re: Carbonda fm936 Thoughts
Wanted to say thank you to all who contributed to this thread as it was invaluable in the first FS build for me. Have only ridden FM936 few times but it feels night and day against my aluminum HT. It did end up half a kilo heavier than expected, but 11.2kg with pedals, power meter, bottle and garmin mounts for size XL seems competitive weight for 3.8k euro. Very glad to have found this forum. Hope everyone has a great summer on their bikes. June 26, 2023, 01:01:49 AM |
1 |
|
Re: Carbonda FM909
Here is my bling build ! Finally in the blue I wanted... With the XX transmission + blip box + multi-click blips, this time without 3D printing needs. Click right for a harder gear, click left for an easier gear, when both are clicked it's for the seatpost. Unfortunately the wireless blips(no more expensive blip box needed) do not have yet the option/firmware? for the seatpost action. The 2024 SID fork 110mm and SIDluxe shock, they have 3 positions now. I was about to start the build, when the 2024 models arrived in the ... matching color, so I returned both to r2-bike, and ordered these instead. Lightbicyle XC924 wheels, with aero carbon spokes at 1035g  I took off the Piccola brakes from my FM936(replacing them by ONIRII ones) One special mention for Fire Spider https://www.aliexpress.com/store/1100268111 for the bar, excellent product and great contact with the seller. Fire Spider are the higher end products of Toseek. It has all the holes to pass the cables, hoses with internal routing(I know top bearings rust... but it's so cute  )I'll order a longer front hose to make it internal too, and drill the fork steerer. I did 2 rides of about 70km so far. With impossible objectivity ... It feels much faster and more nimble than my 120mm FM936Especially when climbing. Love it !! September 10, 2023, 11:54:05 AM |
1 |
|
Re: FM1001 / FM1156 - 135mm frame
I am starting the build of a FM1001 for my wife. The painted frame has just arrived :-).
January 18, 2024, 11:44:27 AM |
1 |