See likes given/taken
Post info | No. of Likes |
---|---|
Re: VeloBuild VB-R-268 frame
From last year, i dont think I posted these. Wrong thread... -> 168 February 12, 2024, 12:13:43 PM |
2 |
Re: Elitewheels Edge wheelset
You have to wait a really good offer from elite wheels and also coupon from Aliexpress. During 11.11 there were 100 USD coupons. Yes, thats exactly how it went. 11.11 coupons + coins + the usual tax adjustment (-19% at Checkout) March 02, 2024, 04:12:20 PM |
1 |
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
Has anyone tried the Darevie Aero baselayer (Rule 28 inspired)? Looks quite interesting, but the sleeves seem a bit too long to be worn under a short sleeved jersey. https://www.aliexpress.com/item/1005006584328019.html March 06, 2024, 07:51:49 AM |
1 |
Re: Build (problems?): Steerer tupe cutting
Thanks to all of you! you can prevent these tearings on the outside by cutting a millimeter deep circle around the whole steerer. And simply cut without much force and make sure when you almost finish the cut that the two parts don't "break" apart March 22, 2024, 03:41:44 AM |
1 |
Re: VeloBuild VB-R-268 frame
Hi! No, its velobuilds own design. (if that's a good or a bad thing, that's up for you to judge. I used a Deda 70mm Expander and a modified compression ring from the SL8 on my VB) March 22, 2024, 03:43:47 AM |
1 |
Re: VeloBuild VB-R-268 frame
Thanks, so the new plastic/injection moulded compression ring for the SL8 fits in the 268?no, does not fit. you either gotta buy a new top headset bearing (with the same ID as the SL8) or you gotta lathe or sand down the SL8 compression ring to make it fit. and you might also need quite a few microspacers as well. But you can also stick with the setup that VB supplies, people don't seem to have these issues anymore. March 22, 2024, 05:03:36 AM |
1 |
Re: Elitewheels Edge wheelset
Thank you RoadieMKD for reply. 25mm GP5000 non TL works perfect on the edge rims. It measures 27.4mm on that rim (which would be perfered aero-wise compared to the 28mm, which might measure closer to 30 and bulge out on the rim) mounting the GP5000 25mm is also no problem. No need for tire lever when mounting and removing (I also use TPU tubes) March 26, 2024, 10:02:24 AM |
3 |