See likes

See likes given/taken


Posts you liked

Pages: [1] 2
Post info No. of Likes
Re: Yishunbike G095D (Speed Gravel) I bought the frame from Yinshun Germany. They only had one left in my size available. And I have to do the paint job myself, that only goes through Yinshun Asia and with at least 3 frames.

Has cost the frame with shipping, 890€

September 13, 2023, 01:42:55 AM
1
Re: Yishunbike G095D (Speed Gravel) Info@yishunbike.com

September 27, 2023, 12:24:30 AM
1
Re: Yishunbike G095D (Speed Gravel) Interested to hear what the tire clearance is like for anyone that receives one. Per previous posters i'm guessing its actually 42mm (with ~6mm each side of that which is the industry standard gap for quoting clearance). So maybe good for up to a 45c tire in practice.
October 06, 2023, 04:14:17 PM
1
Re: Yishunbike G095D (Speed Gravel) You are right. Anyway 50mm tyres is No problems. This is 45 and margin is big.
November 08, 2023, 04:30:35 AM
1
Seraph TanTan GV201 Spotted this new frameset on their social media,  no more information yet.









https://www.facebook.com/Seraphfactory/

February 20, 2024, 12:43:25 PM
1
Re: Alternative for blipbox
Thanks!!.

But i have to update the info above as sram seamingly did the unthinkable and just enabled the sram blips to function as a standalone shifter.

https://bikerumor.com/sram-wireless-blips-can-now-be-paired-w-o-shifters/

It enables some serious potential as the circuit boards are really small.

thats a good news for budget tri bike builder.
since we dont know when wheeltop n ltwoo gonna release tri shifter electronic trigger, apex axs rd + blips would be the cheapest 12sp setup (esp 1x mode)

March 20, 2024, 09:28:32 AM
1
Re: Alternative for blipbox
Can SRAM blips be used with a Reverb AXS seatpost?

Currently, no. From what I understand, that functionality is unlikely.

March 20, 2024, 10:22:52 PM
1
Looking for Tri/Short nose saddles So i recently just built a tri bike.
However as i can now slam forward my saddle to be above bb, my ism pl1.1 copy that i have been using on my TCR no longer work. the 5.5cm width now just felt too wide.

What i currently have:
- Ism PL1.1 copy: too wide 5.5cm nose, soft plastic base that sags.
- ori Giant Approach from my tcr: 3.5cm narrow 270mm long, and long nose hurts ma crotch on longer ride when holding into aggressive posi. this is what i currently use as it doesnt sag as i sit further back, felt best vs others i have.
- Pro Stealth copy, 4.5cm plastic base. nose is ok-ish, but base is soft n sags
- Racework Bontrager aeolus copy. similar as Pro stealth, even more soft n sag

Im looking for AliEx special that have hard base thas still ok for lil to no flex but no sag on longer use, long rails, short nose width 4-4.6cm tip, and widest wing part lesser than 145mm. lightweight not necessity, but bonus. not too high stack ie the rail is tall.
padding, anything thats not slippery n not too grippy destroying shorts should be fine.

I did took a look at 3d saddle thread, n it seems the 3d mesh has potential destroying shorts.

Still scouring aliEx. found these:
- Spesh Sitero copy, not sure nose width. Original sitero review however kinda 50-50. not sure about copy
https://a.aliexpress.com/_oC6GzPI
- Ztto slight modified of Sitero? 4.8cm nose :
https://a.aliexpress.com/_oDnqJi4
- same shape as ztto, carbon no padding. no nose width info. butt destroyer? :
https://a.aliexpress.com/_omY7DYo
- belugoe. i dont know this is referenced of what saddle. unknown nose width :
https://a.aliexpress.com/_oCUKrZi
- ec90 fizik copy. straight noseless :
https://a.aliexpress.com/_oFXmedQ

is there selle italia watt copy?

TiA

March 29, 2024, 11:36:10 PM
1
Re: LEXON Road Carbon Crankset mine is arrived, and have the lockring with internali splines
April 09, 2024, 04:58:55 AM
1
Re: FRAME VAN RYSEL RCR 2023 True but it looks like a velobuild 268 frame
April 17, 2024, 06:26:34 AM
1