See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: 3D Printed Saddles Just got my RYET "Aircode" (who tf named this thing?) in the mail.

The level of comfort was almost a religious experience.
That being said the only saddle I've ridden on before was a raw carbon non-padded one
Somehow i've managed to complete gran fondos before on it just fine, but never occurred to me that I probably shouldn't have felt every hairline crack on the road through my spine hahaha.
So take my review with a grain of salt  :D
September 08, 2023, 05:46:08 AM 		1
Re: LTWOO ER9 & ERX - Electronic groepsets Another masochist eR9 beta tester chiming in:

As with the user above I also had sub-optimal interactions with their customers service, with typically 1 business day gaps in the reply time, so getting a replacement part which I had damaged took a total of 5 days to be dispatched.

Regarding the shifting performance, it's quite good. A few rides so far and no missed shifts or issues with the groupset not waking up.
Shifting under load up to 200w is crisp and the app integration is very good. Being able to adjust each cassette and chainring offset through the app is fantastic for setup, during my first ride I was able to whip the phone out and fine tune the trim whilst riding.
Regarding the trim function, I'm not sure if it is a result of the latest update but you can now trim in both directions (however) the trim direction is not controlled by the user. Essentially whenever you hear front chain rub, pressing shift again will trim the FD if the system determines it needs trimming, and there seems to be several steps. I.e if I shift from the 11th cog to 9th there is a trim step, then 9th to 3rd it will trim again, then the same the other direction.

Install wise it was easy, not having to run gear shift cables saves some grey hairs especially if you're fully integrated. The YouTuber Klein concept has a solid 90min install video which walks through all the steps.
September 23, 2023, 09:52:40 PM 		2
Re: LTWOO ER9 & ERX - Electronic groepsets
Quote from: Maden on September 23, 2023, 10:52:23 PM
What was the part?

I had gotten some debris stuck into the left shifter hydraulic system, essentially i accidentally turned the plastic line plug the wrong direction then couldn't get it out without using an extractor screw. Pretty big oopsie for a lapse of concentration  :'(

I paid for the replacement part since it was my bad, so it's nothing special in terms of customer service.
September 24, 2023, 01:14:44 AM 		1
Re: LTWOO ER9 & ERX - Electronic groepsets
Quote from: jcr on October 02, 2023, 10:38:29 AM
You will need to buy: 14500 battery capacity: 800mAh, 3.7V, 2.96Wh.

I think eBay has them cheap...but not sure if you can use a flat top with the step.

Flattop does not work

I know because i ordered a flat top set of batteries :)
you'll probably need to drop a fat drop of solder on the top or get 14500 batteries with nipples.
October 02, 2023, 07:38:58 PM 		2