Chinese Carbon MTB Forums
News:
Happy Holidays!
See likes
See likes given/taken
| Post info | No. of Likes |
|---|---|
Re: Velo Build R-099 Build
Just curious, what are the little things attached to the spokes? Those are just stickers from the spoke manufacturer Pillar. He will probably remove them soon. 
September 03, 2023, 02:04:54 AM |
1 |
Re: Hygge Aero Carbon Frame
Has anyone been able to find the following details below directly from Hygge? According to their facebook page, their mail adress is "sales@aisurfproducts.com". I did a quick googling session and I found their CEOs LinkedIn (https://cn.linkedin.com/in/aaron-luo), but could not find and more info on their mother company "A&I Enterprise Limited". Their main business seems to be surfboards, as their (dead) website was called "www.aisurfproducts.com". September 04, 2023, 11:47:45 AM |
1 |
|
Re: Velobuild VB-R-168 Frame
Hey guys, I finished my build last week. Wanted to share my experience with you and say thanks for all the insights! I went with a 168 frameset, custom painted in size 54. The ordering process was fine, Chris was responsive and answered all/most of my questions. Settling on the color for the paintjob was not straightforward however, as I wanted a special color for which I had a pantone code (metallic color as per pantone code). He always said that they can do the color, but “not metallic” which was quite confusing since the color code was referring to a metallic color. So after a bit of back and forth, we decided to try a candy-blue paintjob (transparent blue over metallic silver base). After a week, he sent pictures of the painted frame and said that they will paint another one as it wasn’t metallic enough (without even asking me if I was happy with the paintjob). So another week later, I had two “versions” of the paintjob to choose from, and I chose the second one. The paintjob turned out way better than expected, they did a really good job! I received the frame via DHL to my door (Germany), with XDB shipping and no additional duties within 10 days after it got shipped. Frame quality was good. The inside of the fork had a few loose glassfiber-bits inside, maybe the reaming wasn’t perfectly done. I removed most of them, but the steerer tube was a bit to tight for the Deda 70 compression plug, so I sanded down the lower part of the compression plug a tiny bit. As for the compression ring, I went with the SL8 one that I got from Specialized for 5€. As the SL8 uses a Headset Bearing with an ID that is 0.5mm larger than the VB, I had to modify the compression ring by sanding (no issue since its made from plastic). To ensure enough clearance between the frame and the lowest headset spacer, I had to use 5 FSA microspacers that I cut to allow for internal cable routing. I also bent the lowest microspacer to prevent the sharp edges of the cut spacers from damaging the brake hoses. (as seen in the pictures) Headset is free of any play. I used the separate bar/stem combo, but 3D-printed a topcap that allows to run spacers above the stem to validate the position before cutting the steerer (too) short. Routing the brake hoses (no shifter cables, as I run semi-wireless Di2) trough the bars was tough and required some sanding to remove the sharp edges on the exit holes in the handlebar. (I have tons of respect to you guys who manage to route 4 cables trough those handlebars, lol. Seems impossible from my perspective) Building the bike was straightforward. BB was properly sized (a tiny bit undersized, but the Token Ninja BB pressed/threaded in fine). As for the seatpost, I originally planned to replace the aluminium hardware with carbon parts from an old Elita One seatpost. However, they did not fit (and were only marginally lighter anyways). Has anyone found good replacement hardware to shave a few grams of that seatpost? However, I had no issue with a slipping seatpost (used carbon paste) so far. Regarding the weights: • Frame (without any hardware, Size 54, painted in “candy blue”): 1025g (photo shows frame with hardware and axle) • FD Hanger with screws: 15g • RD Hanger with screws: 17g • Uncut Fork incl. separate crown race: 428g (cut to about 402g, with a few cm left to be cut) • Stem 100mm (without Topcap): 193g • Handlebar 400mm: 270 g (quite a bit heavier than expected) • Headset spacers (all, without c-ring):77g • SL8 C-Ring: 5g • Seatpost: 240g • Seatpost grommet: 2,4g • Seatpost wedge: 24g • Front Axle: 37g • Rear Axle: 45g • Headset bearings: 62g The whole build with complete Ultegra Di2 R8100 came out at 7,78 kg without pedals or 8,19kg with Pedals, Bottle cages, computer mount. Once I dialed in my fit (coming from an endurance frame that was already slammed, I will slowly lower my position), I will probably shave a few hundred gramms by switching to a lighter cockpit, saddle… Also thinking about a lighter wheelset (currently at 1635g for the pair). Complete price was also quite competitive I guess, as I paid less than 2800 euros for the whole setup with frameset, groupset, wheels, tires, small bits etc (without pedals & cages), including shipping and taxes. (all bought new, so no second hand prices). Bike rides really well without any issues, but I have to get some more kilometers in! Definitely happy with my build so far! September 15, 2023, 08:02:09 AM |
6 |
Re: Velobuild VB-R-168 Frame
nice built, and nice color. do you have a link for the sl8 compression ring? You have to contact your specialized dealer, they will help you out. Part number is S222500011. September 16, 2023, 06:21:01 AM |
1 |
Re: Yishun, Velobuild etc. like Canyon frames geometry
I'm new here and wanted to ask if there are frames from Yishun, Velobuild, etc. that are comparable to the Canyon Ultimate CF SL or the new Canyon Endurace CFR? Hey, just a heads up: the ultimate and Endurace have a vastly different geometry... you probably should not mention them in the same sentence From the back of my head, the Velobuild 066 (old external and new interally routed Version) is inspired by the Canyon Endurace, geometry-wise and look-wise. But i didn't compare the geometry charts. https://www.velobuild.com/products/2023-vb-r-066-carbon-fiber-endurance-road-racing-bike-frame-disc-version Based on your height and inseam, i wouldnt say your dimensions are that difficult to work with - no super long or short legs. Best is to compare the frame geometrys of your existing bike, e.g via bike-insights. September 22, 2023, 09:21:03 PM |
1 |
Re: Yishun, Velobuild etc. like Canyon frames geometry
What about that frame: The 068 looks like it could match your needs. https://bikeinsights.com/compare?geometries=64e1237c909fa3001af0d10d,64f1dcc50f4eac001a44ba89, Compared to the endurace in size M, its a bit longer and lower, so a bit more racey, but its not a full-on race position. However, its hard to recommend a Bike fit based on measurements, it also depends on your flexibility ans preferences. I'd recommend to compare with your gravel bike and see if you could tolerate going longer/lower or if you need a relaxed position. Greetings from Germany! i hope you got a great deal on your Votec, so it doesnt hurt that you bought the wrong size!  September 23, 2023, 05:54:15 AM |
1 |
Re: Velobuild VB-R-168 Frame
Beautiful build and paint scheme. Congrats. Small question , what is happening with the seatpost dustcover? Seems to overhang to the back? Not being picky, just trying to figure out what to expect on my own build. Thanks. That overhang is normal on the velobuild cover. I also thought about trimming it, but i am not sure if it will look better. Maybe i will getw the specialized grommet, that seems to be better! But its nice that they include a seatpost grommet now! October 13, 2023, 12:58:50 AM |
1 |
|
Re: Frameset fit 32C or 38C tires
The 177 does not fit 32s comfortably. Look at the thread about the 177 or PatLinos videos. However, the 168 has a bit more clearance, which he explained in his unboxing video, i guess. (https://youtu.be/nksJX4KVleQ?si=RFvANOcuPCLEmx4F) October 17, 2023, 01:16:40 AM |
1 |
Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
A short review of these 'The One' style handlebars from Kocevlo: Sounds great, i am also thinking about getting those bars! You mentioned that a sticker is easily removed. Are you talking about that white "Kocevlo" branding? that was actually holding me off from placing an order since I always read "Cock-Velo"  So great news, if that can be removed without residues. And are the measurements true to size in your opinion? E.g. Hood/Drops width, reach, stem length, angle? I read a lot of contradicting statements regarding that barstem (from different manufacturers) Thanks! October 27, 2023, 07:51:33 AM |
1 |
|
Re: Elitewheels Edge wheelset
I snagged this wheelset for a whooping 444€ including "tax-prepaid" shipping to Germany, in the 50mm variant, 21mm internal, but I asked for no decals. I am now debating on which tire width to get. I will get a GP5000 non TL (with 19g TPU tubes), but the question is wether to get 25mm vs 28mm. I have always had 25mm GP5000 tires and they measure about 28mm on my current wheels with 20.5mm internal width. Has anyone tried GP5000 in 28 mm on these rims? How is the tire-rim interface? I always hear about the comfort (which I don't need probably), but I fear that they would bulge up on the 21mm internal rims and be even wider than the rim, "ruining" the aero benefits... November 16, 2023, 11:25:59 AM |
1 |