See likes given/taken
Post info | No. of Likes |
---|---|
Re: DT 240EXP hub clones Goldix, Venfort
I received the hubs, they look very good! Even one bearing (only one, I don´t know why) is from NTN. The others are from NRW. My model is GDR310 so, no EXP240 version. The weight was 319, so very good, close to DT 240 in terms of weight. Do you know any official website for this Goldix brand? These are some pictures: The most particular thing, from my point of view, is the red parts. The last one is like a lock ring to keep the spring in the correct position. This is missing in the DT Swiss desing. I think that these red parts are adding a bit of weight, this 10 grams of difference: Freehub pictures: NTN bearing: Hub general pictures: October 26, 2021, 06:19:39 AM |
3 |
Re: DT 240EXP hub clones Goldix, Venfort
I just dismantle, some more pictures: Red parts: Spring retention ring: Ratchet rings: I will compare with my DT350 hub that I have already... just to see if they are compatible like everybody says. it could be good, DT replacements are easy to find. October 28, 2021, 05:24:43 AM |
5 |
Re: DT 240EXP hub clones Goldix, Venfort
DT350 freehub and ratchet rings are fully compatible with this Goldix GDR-310. About Yuanan, I am not sure if it is the real factory. For one Goldix MTB MH14, could be for this road hub I couldn´t find in their website. Bearings: Front hub: 2x6902 Rear hub: 2x6902 (hub body) + 2x6802 (freehub) In comparison with a DT 350 hub, the freehub also have 6902 bearings. In a sense, more reliable. Some weight comparison of freehub and ratchet rings: Goldix freehub - 44 grams DT freehub - 62 grams Goldix ratchet rings- 14 grams DT ratchet rings - 23 grams October 29, 2021, 02:13:34 AM |
3 |
Re: DT 240EXP hub clones Goldix, Venfort
In terms of geometry are similar but not the same. Also DT350 weights around 360 DT240 EXP weights around 310 And this hubset weights around 320, so in terms of weight they are more similar to DT 240 (internals are quite equal in 240 and 350). About bearings, freehub are different, compatible but Goldix freehub uses 6802 bearings and DT 6902 bearings (in old ratchet). Comparing with DT 240 EXP, this are a bit better, it uses 1526 (15 x 26 x 7 mm) bearings, so bigger ball race than 6802, so we assume that they have longer life. In terms of bearings lasting 6902 > 1526 (15 x 26 x 7 mm) > 6802... theoretically. Just a note: Goldix front hub uses 6902 and I think that it could be enough to use 6802 in this case and this will save some grams. DT240 EXP front hub 24 holes center lock -> 104 grams Goldix GDR310 front hub 24 holes center lock -> 113 grams DT240 EXP rear hub 24 holes center lock -> between 204-210 Goldix GDR310 rear hub 24 holes centerl lock -> 206 grams November 02, 2021, 06:01:56 AM |
5 |
Re: Integrated Handlebar
Did you see the new The One Pro 2022? Very good looking handlebar! https://es.aliexpress.com/item/1005004073857036.html June 21, 2022, 05:26:26 AM |
2 |