46
29+ & 27+ / Re: ICAN P1 or P9 with 140 fork and 215 shock
« on: May 15, 2020, 02:37:35 AM »
P9 will work, but:
- for every 10mm of fork A to C there's 0.5degrees of head angle
- 216x63 does fit, but on a full compression the rear triangle goes dangereously close to the frame, and the wheel so. Minimun flex/deformation would make for hard contact. If you can somehow limit the the travel with an internal block, it would be awesome. Also the offset bushings would be a great thing, since the longer eye to eye will also alter the geometry (again, less slack).
You have very good offers in rczbikeshop for 210x50/55 shocks that would be a good fit in the frame. We are not speaking here about 400 more usd for a shock.
- for every 10mm of fork A to C there's 0.5degrees of head angle
- 216x63 does fit, but on a full compression the rear triangle goes dangereously close to the frame, and the wheel so. Minimun flex/deformation would make for hard contact. If you can somehow limit the the travel with an internal block, it would be awesome. Also the offset bushings would be a great thing, since the longer eye to eye will also alter the geometry (again, less slack).
You have very good offers in rczbikeshop for 210x50/55 shocks that would be a good fit in the frame. We are not speaking here about 400 more usd for a shock.