Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - 6un4

Pages: [1]
1
29er / Re: Carbonda fm936 Thoughts
« on: September 26, 2021, 03:05:23 PM »
Just about any sounds that shouldn’t be there.

2
29er / Re: Carbonda fm936 Thoughts
« on: September 21, 2021, 02:04:17 PM »
Hey guys, how is your experience with noises on this bike while riding, how quiet it is? ( seen that 180mm bolt issue )

3
29er / Re: Carbonda fm936 Thoughts
« on: December 21, 2020, 02:23:58 PM »
Hey guys,
So anyone who have this frame and posted those bolts with some wear ... Did it get any worse?

4
29er / Re: Carbonda fm936 Thoughts
« on: November 13, 2020, 10:52:40 AM »
Ok, so another go... Has anyone here tried to ride this carbonda and specialized epic evo? ( 2020/2021 )

5
29er / Re: Carbonda fm936 Thoughts
« on: October 23, 2020, 06:11:44 AM »
Maybe anyone here have tried this carbonda bike and specialized epic evo? I think I could justify spending ~4k € on a bike and not sure which is better.

6
29er / Re: Carbonda fm936 Thoughts
« on: September 19, 2020, 01:23:27 PM »
Maybe someone here has tried specialized epic evo and this frame ? How they are in comparison?

7
29er / Re: Workswell WCB-M-062
« on: June 26, 2018, 04:43:03 AM »
Yes.
First painted frame and fork in white. Then applied some hair gel on it ( random lines, thicker lines work much better ) and then painted it all blue. Removed hair gel and you can see the result )


Here you can see gel under blue paint ( actually really liked it in plain blue )




8
29er / Re: Workswell WCB-M-062
« on: June 25, 2018, 04:44:21 PM »
Hey,
been following this thread for 2 years already and finally decided that it' s time :D
had a trail bike on ragley big wig frame. Fun bike, but horrible at pedaling.
So ordered Sobato frame ( 17'',BSA, ud matte) on ebay and tideace fork because I could not register on alliexpress.

items came in around two week time to england. well packed and without any damage.
didn' t like the boring black colour, so plan was to have a bit of fun with spray cans. did use spray.bike paints.

So this will be my previous bike with parts



Frame - Ragley big wig 16"
Fork - RoskShox Sektor RL Gold 140mm
Headset - Gusset
Stem - Pro Koryak 60mm
Bar - Renthal Fatbar Lite Carbon 740mm (180g)
Grips - Ergo GE1
Crankset - Shimano XT M8000 32T chainring
Pedals - Shimano PD520
BB - Shimano Deore HT2
Seatpost - burgtec 31.6
Seatclamp - Hope
Saddle - Specialized Phenom comp ( ~2013 )
Wheelset - Hope Pro2 Evo/ZTR Arch Ex/Sapim race(R-998g/F883g) tubeless
Tires - F-Maxxis Ikon 2.2 3c/TR/EXO  R- Maxxis Aspen 2.25 TR/EXO/120TPI + orange seal
Brakes - Shimano Deore M615
Brake Disc's - Shimano RT86 F-180mm/R-160mm
Cassette - 10 speed SunRace MX3 11-42 (389g)
Rear derailleur - Shimano SLX m7000
Shifter - Shimano Zee
Chain - Shimano XT


So most of these parts went from Ragley to this carbon frame.
I used seatpost from old road bike ( BMC granfondo ),because previous frame had 31.6mm post.
Zipp service course sl 70mm stem, cause it was little bit longer and was in the parts box )
ESI chunky grips, because I didn' t like those ergo grips at all, probably poor adjustment or something else :D
And in few days I will reduce travel on the fork, so it will be 100mm and then maybe paint lowers in same blue as the frame, only without white bits. SO then I will have 2 fork options )





Also at the moment rear is QR. ordered wrong adapters and hub spacing isn' t right, brake disc hits the caliper tabs.

my inacurate scales say that bike is 9kg


9
29er / Re: Workswell WCB-M-062
« on: August 18, 2015, 05:09:51 AM »
Hi.
Have read whole thread and really like the frame. At least I like the looks and weight of it. Can someone share the ride impressions?  I'm doing all kinds of riding. Trails, xc races and sometimes just goofing around in a city down the stairs and so on, so will this frame be fun on trail downhills?)

Pages: [1]