Chinertown
Chinese Carbon Road Bikes => Road Bike Frames, Wheels & Components => Topic started by: Stef27 on June 18, 2018, 05:46:28 AM
-
Hello
I need carbon raod disc fork.
Do you have a good link with good quality ?
Thanks
-
The one on my Carbonda gravel bike, looks sturdy and has mudguard holes.
And it was already tested on much harsher conditions than a road bike would generally meet.
They probably can sell it as a spare, without the frame.
-
Ok thank you.
I contacted hong fu,they can sell a fork,but he said he don't know if it fit on my frame,beacause their fork fit with their frame.
What do you think about that ?
My frame is cube Attain disc.
Here is the exact answer i recieved.
"We have road disc fork, but it fit our frame. I have no idea if it can fit you. Could you show your frame to us?"
-
Most if not all modern forks are tapered.
The base diameter is 1.5", then the tube goes conic until reaching the 1 1/8" diameter.
Check the diameter of the two holes of your headtube.
If the bottom is about 56 or 55mm and the top is about 44mm, a tapered fork tube will fit.
If you have both holes the same, and smaller size.
Then you need to look for a non-tapered fork.
-
I don't have this frame yet.
I want to buy it next week.
Here the product feature :
Headtube diameter: Tapered 1 1/8" - 1 1/4" integrated IS41 - IS47 (Cube Headset FSA Orbit #10360)
So,with your answer i know i can buy anything i want with 1 1/8-1 1/4.
Thank you.
-
No... it seems tapered but 1 1/4 - 1 1/8 instead of the usual 1 1/2 - 1 1/8 you will find from most chinese frames & forks.
Unfortunately probably something specific to Cube: https://www.bike-discount.de/fr/acheter/cube-headset-fsa-orbit-c33-acb-1-1-8-1-1-4-619496
-
Yes
I think it's problem to find fork and other parts.
So ,i think about a Chinese gravel frame.
Possible yishunbike R004-D or R007-D.
For the moment.....reflection
-
Did you look at the Carbonda ?
http://ridinggravel.forumchitchat.com/post/chinese-carbon-gravel-build-carbonda-8254658
-
They look greats but not in my budget.
All time ,money says yes or no.
I wanted the cube because it's a 2016 model and the price is good (250€).
Beacause i want to buy all parts little by little.
The aim is to build the bike for the next year.
And the big costs are frame,wheel,group.
Thank you for your link.