See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: VB-R-066 D Build Glad to see a thread started for the R-066.
I have one ordered and just waiting for shipment.
I decided only to get the frame from Velobuild and get rest of the parts from Aliexpress.
Once I get it, I'll weight frame (M) and post here.

June 02, 2022, 04:44:59 PM
2
Re: VB-R-066 D Build Got my frame today!!!
I ordered a M size frame and custom paining on 04/30, so 5 weeks turnaround...
So far, I'm liking it. If it is OK with OP, I'll tag along to this post for this build.
Same day, I ordered a wheelset from Elite (RD-16, 45mm) but who knows when I'll get it. It has been stuck in "Accepted for transportation by Post" for 2 weeks.. :-\

I've weighted all parts separately...

Frame (size M) with thru axle: 1043g
Fork with thru axle: 410g
Seatpost: 212g
I wont start the build until Friday, in case anyone has a question....

June 06, 2022, 04:36:18 PM
3
Re: VB-R-066 D Build After a lot of delays, I finally finished this VB-66 build.
Although I went the budget route, somehow but was able to keep at a very decent 7.625kg.
Paint is holding up well but matte finish gets dirty very quickly. I might add a clear coat later on.
I thought i was going to hate the saddle but so far it has been fine on 2hr rides...
Only thing I might change soon are the brakes. Still playing with different pads to see if they get better.
So far, I'm loving it...

July 25, 2022, 01:31:20 PM
2
Re: VB-R-066 D Build Adding more pictures...
It looks sweet. I love that color...

What kinda cable housings did you use on the brakes? My gf's Felt endurance bike runs SRAM Force 1x with mechanical disc brakes similar to yours, and after switching her brake housings to Jagwire compressionless, they felt and performed a million times better. I also used to run mechanical disc on my integrated road bike and the compressionless housings also made a significant difference, but not nearly as much as the gf's bike that doesn't route cables through the bars.

I used to run that same saddle and absolutely LOVED it. But I feel the build quality just wasn't perfect and the rails gave out on me after a few months. Velobuild was amazing about sending me a warranty replacement and I opted for their other banana shaped model this time

Thanks, I'm loving the color too. I might add some stickers later on.

That is what I have, Jagwire compresionless. I think the problem is the cheap brake pads they came with. I have replaced rear ones with Shimano organic pads and so far, it fells less grainy and have a just a bit more braking power. I'll just have to get use to mechanical brakes again.

Saddle has been great so far. I acually got it from aliexpress and not through Velobuild. Only thing is, top is very thin and if i'm sitting just to the side, I feel it digging in my cheeks :o. But when I shfit back the weight to the center, it is great.

July 25, 2022, 08:00:14 PM
1
Re: VB-R-066 D Build
Some Shimano pads definitely make a difference. The gf runs Shimano metal pads along with the Jagwire and is pretty happy with them over the stock setup. I tried to get her on a hydraulic set but she prefers the mechanical calipers because they're purple  :D :D

That's the saddle! It looks exactly the same. I miss it so much :P

I would also be interested in your opinions on the Senicx crankset...it looks quite nice.

Here is where i got the saddle:
https://www.aliexpress.com/item/2251832657672829.html?spm=a2g0o.order_list.0.0.1aa11802EeNmlF&gatewayAdapt=4itemAdapt

Senicx crankset has been very good. Absolutely no issues working with the Sensah shifter. 105 weight at 1/2 the price. But there are some details i have to share... Senicx PR2 is SRAM DUB and this frame uses PF86 BB (DUB 30mm and PF86 shell 41mm) So, PF86-DUB BB bearings are tiny; this will cause friction and low life expectancy out of the BB. I just started seeing a new model, PR3 that uses shimano 24mm; this might have been a better fit on this frame. But anyways... Crankset has been very good and it has a nice quality finish; no noises, no flexing so far.





July 27, 2022, 12:53:49 PM
1
Re: VB-R-066 D Build
Looks great everyone! May I ask how is the tyre clearance like?
I'm using 30mm tires and there is about 8mm space on either side on the front and about 5mm in the rear.

September 12, 2022, 03:09:29 PM
3