See likes given/taken
Post info | No. of Likes |
---|---|
Re: Stumpjumper clone
Charts, Today my Frame came. June 22, 2021, 04:29:17 AM |
2 |
Re: Stumpjumper clone
Here it is I’m almost finished with the build a little Setup on the suspension and bleed the frontbrake left over. It ended having 13,85 kg and I don‘t went with that super lightest parts like my nx parts I had left from another bike and some other parts Sometimes i left everthing in downstairs and went to bed before I throw everthing away July 13, 2021, 05:09:47 PM |
1 |
Re: Stumpjumper clone
So here is my finished product
July 16, 2021, 09:02:02 AM |
3 |
Re: Stumpjumper clone
So I’ve finished the build a few weeks ago, suspension is set up and I’ve made a few runs with it. For my poor legs I took a 30tooth chainring it climbs very well. Me and my friends doing only 1k hm tours and riding the rough trails down it works great but it was a hard way to fix everthing . I took the original specialized bearing kit and bolt hardware but I had to build me some spacers to get out the play of the rear triangle. That was only an issue with the specialized hardware. For the headset I bought also a higher quality one and took one 2,1 mm Spacer to fix the gap on the upper bearing and cap. I don‘t recommend building this one without mechanical background there are lots of small problems coming up here and there. But if you master them you’ll become a cool bike working well August 10, 2021, 02:40:32 AM |
1 |
Re: Stumpjumper clone
Maybe I can help you I’ve ridden mine rough downhills and there is no flex but some of spacers and bearing have to be shimmed to end with no play and smooth moving
September 04, 2021, 12:52:04 PM |
1 |