See likes given/taken
Post info | No. of Likes |
---|---|
Re: Carbonda fm936 Thoughts
Thanks both of you! I was aware that other 165 shocks are all the same. I just wasn't sure if the proprietary nude changed something that effected that or what size the spacers were. Thanks for all the info! By the way, I drilled a hole for the cable)) (Adam didn't ask for the front triangle to be cut when the new one was shipped under warranty last year, so I have room to experiment) March 02, 2022, 03:03:42 AM |
3 |
Re: Carbonda fm936 Thoughts
Hi, I have bought a fm936 size L, normal lay up and feel like there is a lack of stiffness in the front triangle : it wiggles significantly more than my other bikes when pushing left right with the bar. I have not read any complain about this anywhere. I have changed the fork for a 35 mm, but still have a strange feeling in the turns that came from this lowish stiffness I think. I have a on one scandal definitively stiffer. the feeling that the frame is bending can come from using a stem longer than 50mm. From using a 51mm offset fork. Due to the 66-degree head angle with a long stem and large fork offset, the bike becomes over-steered, giving the feeling of a flex frame. The front triangle is very rigid. The rear may have some suppleness, but you don't feel it when driving. August 22, 2022, 02:27:37 AM |
2 |
Re: **Haideli Customer Appreciation FM-M009 Hardtail Frame GIVEAWAY!**
enter
August 22, 2022, 09:48:46 AM |
1 |
Re: Carbonda fm936 Thoughts
These are 21oz Camelbak Podiums, I'll have to try some longer bottles can you share the STL file? January 26, 2023, 11:46:49 PM |
1 |
Re: Spcycle 2023 New Travel 120mm Super Light 29er full suspension frame
wishes, since they are asked)) 1. suspension leverage 2.7-2, that is, progressive leverage. 2. antisquat 100% with 32 chainring 3. two liter bottles of water 4. cable routing through the frame. 5. quality aluminum parts and overall quality May 03, 2023, 07:21:41 AM |
1 |
Re: Epic Evo Clone
does anyone have feedback after long term use?
May 19, 2023, 10:03:36 AM |
1 |
Re: Epic Evo Clone
Not bad at all if you want a 100/100 XC bike. It's a regular epic frame. I wanted more travel.....I wanted the epic evo. this bushings or bearings? (marked on the photo) May 21, 2023, 04:11:10 AM |
1 |
Re: Epic Evo Clone
either way i think i’m getting it. I will read your comments about this frame with great pleasure and interest. How well the frame is made, how reliable it is, how rigid it is in bending and twisting June 02, 2023, 12:03:01 AM |
1 |
Re: Epic Evo Clone
https://www.foromtb.com/threads/chiner-doble-poquito-a-poquito.884768/page-215 I didn't manage to register with permissions to discuss. To ask the owner of this frame about his impressions of it June 06, 2023, 02:08:27 AM |
1 |
Re: Epic Evo Clone
Was able to build it today. Bushing provided did not suit for my rockshox shock. So I have to trim down my existing DU 20 bushings.. A lot of work with rasp and some with ange grinder. And it was ready to go. you need to ride at least 2000 km and 20,000 m uphill ... preferably with jumps, drops and other mtb loads July 04, 2023, 10:08:54 PM |
1 |