Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - jefflinde

Pages: 1 ... 11 12 [13]
181
I was getting close to pulling the trigger on a set of these M1 boost centerlock and it says plenty are in stock but they can't be shipped to the United States.  I found other AlixExpress stores that will ship and I found them on Walmart but I'd prefer to get straight from Ztto.  I sent them a message but time difference means they won't reply.  Trying to figure out if I build myself or order full wheels from BTLOS before their free shipping ends.  Has anyone in the United States been able to order directly from Ztto official store on aliexpress?

I just received a set from ZTTO Bike store. I am not sure if that is their official store or not.  I guess I assume it was.

182
29er / Re: LCFS947 - 160mm 4-bar 27+/29
« on: June 29, 2022, 02:21:00 AM »
I have this frame in size large and has the same issue with play.  My lower shock bolt was slightly under sized.  So I purchased some aluminum tubing with a 10mm OD and a 5mm ID which is the correct hole size for an m6 tap.  I cut it to length and tapped each end.  Red lock tight on one bolt and some never seize on the other.  The tubing came in at 9.95mm vs the 9.72mm on my stock bolt.  The play is gone and I even saves a few grams over the stock steel bolt.  Total cost was about 20.   

183
29er / Re: LCFS947 Build (Risky Business)
« on: May 23, 2022, 01:46:27 PM »
Where is the creak coming from?  I also have this frame and my lower shock mount boot was slightly under sized by .08mm and it was creating play in the linkage.  I ended up making my own out of some bar stock and it took care of the issue. 


184
29+ & 27+ / Re: DengFu M08
« on: June 07, 2018, 10:56:27 AM »
where are you guys getting this info.  when i look at the website i don't see any mention of the M08

185
29+ & 27+ / Re: 27.5+ FS Frame Options
« on: July 13, 2017, 10:38:33 PM »
I am in the same boat as you in looking for a full suspension + bike.  couple things i would add to your list. 

FS27 -
- it does not use a trunnion shock it is just upside down.  any regular shock that is 165x38 will fit. 

Dengfu-
- the Geo is the same as the M06 frame.  all they have done is create a boost spaced rear end.  i emailed them about this frame as to me it seems like the best option.

-i think a lot will come down to the geo.  all the designs have been proven by some name brand manufacturer so i would not worry about that.  like the flex stays of the FS27 and FM006. 
-the 165x38 shock is a pretty common XC bike shock size so i would not really count that as a con unless the travel that it provides is not what you are looking for and then that pretty much should rule out that frame anyways.   
-you have both XC and AM head angles as pros, that tells me you may want to look at what you want the bike to do.  those are kind of mutually exclusive riding segments.  find out what you do more of and go with that frame. 
-the P9 is listed as OEM old so not sure if Joe Public can buy this.  something to look into. 


just my thought

cheers


186
Component Deals & Selection / Re: Chinese hubs?
« on: June 17, 2017, 08:58:35 PM »
I know this a bit of an old thread but i have 3 sets of Chosen hubs and all have been going great.  I am 250lbs out of the shower and i have had no issues.  Going on my second winter third summer on the oldest set and not one issue.  they are also pretty light.  comparable to DT Swiss.  I have purchased all of mine from DengFu but they are available on eBay as well.

Best of all they are super affordable.  they run about $120/set.


187
29+ & 27+ / Re: 2017 27+ Dengfu FM006 (Scott Spark RC 900)
« on: May 02, 2017, 10:22:00 AM »
Sorry for resurrecting an old thread.  i just spoke with Melody last night about this frame.  the front triangle is the same as the M06, it is just the rear that is different.  i wanted to know if it would work with a regular 29er and she said yes.  the geo is also the same just with boost spacing at the back.

188
29+ & 27+ / Re: Anyone 29+ a china Fatbike frame ?
« on: May 02, 2017, 10:19:04 AM »
I have the Dengfu F190 and i have a set of both 29+ and 27.5+ wheels.  At 6ft and 245lbs i much prefer the 29+ wheels.  i am running the WTB Ranger 3.0 on there now.  so far everythign is working great. 

189
Fat Bikes / Re: 18.7lb fatty
« on: May 27, 2016, 09:51:35 PM »
I know this is old but i am pretty sure the frames they use are the same as the DengFu FM190.  they geo is identical and the chart even looks identical.  i looked at the Lamere but i could get an entire bike by going with the FM190 over the Lamere with the same geo numbers. 

190
Fat Bikes / Re: Chinese Carbon Fat Bike Pic Thread
« on: May 27, 2016, 09:34:22 PM »
just joined so i figure i owe some pics.  Mine is the white FM190 and my wife is the black one.  her is set up with 27+ so it looks a little different. 

Pages: 1 ... 11 12 [13]