1
29er / Re: Epic Evo Clone
« on: November 20, 2023, 01:32:55 AM »
I am searching for S size and no website (allstar or airwolf) available in S size. Is there other dealer who can provide S size?
Chinese Carbon MTB Forums
News:
Happy Holidays!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
29er / Re: Epic Evo Clone
« on: November 18, 2023, 01:40:55 AM »Frame finally showed up. Looks good to me!
Where did you order?
Painting is so good.
3
29er / Re: Spcycle 2023 New Travel 120mm Super Light 29er full suspension frame
« on: November 15, 2023, 01:47:06 AM »
when size S will be available?
4
29er / Re: SP-Cycle M06 build thread
« on: November 14, 2023, 12:29:47 PM »
is the frame the same geometry as the SCOTT 2023 frame?
5
29er / Re: Carbonda FM909
« on: November 05, 2023, 12:24:08 PM »Thank you for the nice comments
@pedaldancer, this was years of continuous blue research, the frame, the brakes, and finally the fork
I'm not really a frame decal guy, the sid logo in chrome could be an upgrade.
@Ludo, it is raw carbon, with a blue tinted clear coat, it looks like it has tiny metallic sequins too.
@arno, it is a size M and weigh 9.52kg
May I know your height?
I am 174cm ( 5'9") and use a size M frame with a 60 mm Carbonda handlebar. I feel 1 cm short.
6
29er / Re: Carbonda FM909
« on: November 05, 2023, 11:53:36 AM »Here is my bling build !
Finally in the blue I wanted...
With the XX transmission + blip box + multi-click blips, this time without 3D printing needs.
Click right for a harder gear, click left for an easier gear, when both are clicked it's for the seatpost.
Unfortunately the wireless blips(no more expensive blip box needed) do not have yet the option/firmware? for the seatpost action.
The 2024 SID fork 110mm and SIDluxe shock, they have 3 positions now.
I was about to start the build, when the 2024 models arrived in the ... matching color, so I returned both to r2-bike, and ordered these instead.
Lightbicyle XC924 wheels, with aero carbon spokes at 1035g
I took off the Piccola brakes from my FM936(replacing them by ONIRII ones)
One special mention for Fire Spider https://www.aliexpress.com/store/1100268111 for the bar, excellent product and great contact with the seller.
Fire Spider are the higher end products of Toseek.
It has all the holes to pass the cables, hoses with internal routing(I know top bearings rust... but it's so cute)
I'll order a longer front hose to make it internal too, and drill the fork steerer.
I did 2 rides of about 70km so far.
With impossible objectivity... It feels much faster and more nimble than my 120mm FM936
Especially when climbing. Love it !!
I always want to use a 70mm integrated handlebar. Now I found it thanks.
Does washers and chassis come with handlebar match with fm909 frame?
7
Component Deals & Selection / Re: EDS electronic rear Derailleur
« on: October 05, 2023, 10:51:16 AM »
But fixed battery weight is increase.
8
Cyclocross Frames, Wheels & Components / Re: Spcycle New Mold G056 Carbon Gravel Frame
« on: February 13, 2023, 01:01:10 PM »
I couldn't find your aliexpress link. May I know your wechat contact?
9
Cyclocross Frames, Wheels & Components / Re: [Q]Comfortable Long ride Gravel Frame.
« on: February 13, 2023, 12:46:20 PM »Look at how the stack/reach from the aliexpress geometry picture compares to your current bike(s).
You can check with https://geometrygeeks.bike/ too.
Usually gravel frames are more relaxed, but not always.
From memory, Tantan doesn't have a really good after sales service in case something happen.
May I know which one is more relaxed in between carbonda 696 and 707?
10
Component Deals & Selection / Re: Interesting Aliexpress finds! - good deals, interesting stuff, new products etc!
« on: December 21, 2022, 10:54:50 AM »11
Component Deals & Selection / Re: DT 240EXP hub clones Goldix, Venfort
« on: November 10, 2022, 12:12:51 PM »
I have many experiences with Chinese ratchet hubs. Their built-in bearings are bad. Some are bad at first before use. Some became bad after using 2-3 months (600-900 km) and need to replace. I think their bearings are not water-resistant.
So, my suggestions are
- put lubricants before start using.
- and if it goes bad after using it for a while, replace it with a good-quality one. (Though you replaced new bearing, it still cheaper)
for 60t clone ratchet, I have no issue with so far.
So, my suggestions are
- put lubricants before start using.
- and if it goes bad after using it for a while, replace it with a good-quality one. (Though you replaced new bearing, it still cheaper)
for 60t clone ratchet, I have no issue with so far.
12
29er / Re: Carbonda FM909
« on: October 14, 2022, 05:52:58 AM »May be this helpsAt that video, he removed the metal ring (in the open eyelet).
So, I need to remove metal ring in my sidluxe open eyelet?
13
29er / Re: Carbonda FM909
« on: October 12, 2022, 07:44:17 AM »
Though The frame is not arrived yet. I bought shock and mounting hardware.
I am not familiar with this process to mount.
I tried these two hardware and neither of them are working.
Do I need to remove metal ring in the open eyelet of the shock to fit them?
I am not familiar with this process to mount.
I tried these two hardware and neither of them are working.
Do I need to remove metal ring in the open eyelet of the shock to fit them?
14
29er / Re: Carbonda FM909
« on: September 08, 2022, 12:05:20 PM »I found this, If I cut it to 30mm, is it ok to use?I will use with RockShox sidluxe.
15
29er / Re: Carbonda FM909
« on: September 06, 2022, 02:13:22 PM »
I found this, If I cut it to 30mm, is it ok to use?