See likes

See likes given/taken


Your posts liked by others

Pages: 1 [2]
Post info No. of Likes
Re: Carbonda Cfr 1056 Hi, yes 160mm fits with adapter.

Advice: read the whole topic and note all the issues, remarks, tips in there. If you build yourself it is useful to have, if you'll ask a shop it might be useful for them.

If you have mechanical brakes the ztto hydro-mech brakes are ok, the juin tech apparently are really good(no experience myself). Do use compressionless housing, and consider external routing because they are hard to route internal.

Some tips:
Decide if you want internal routing or external to figure out which fork.
Do you want it painted? Go check what you like and pantone colours.
Headset is choice between Carbonda or FSA. The latter is slightly nicer, especially the expander works better.
Thru axles from Carbonda are OK (they used to be a bit soft, the newer ones are much better), there are better options on the market at a cost (120usd vs 25 usd for a set of fr+re).
Ask for/order extra spare parts. Specifically seat tube clamp and bottom frame guide for front derailleur cable.



September 20, 2021, 02:54:02 AM 		3
Re: Carbonda
Quote from: jstrawks on September 28, 2021, 01:10:51 PM
Wow, that is REALLY similar. My 1056 doesn't have that arc in the chainstays.

https://www.dolan-bikes.com/tuono-disc-carbon-road-frameset/

Must be the angle of the photo. It is the exact same frameset. I've got spare parts from dolan that actually have a stamp with "1056" inside.
September 30, 2021, 06:11:44 AM 		1
Re: 1.5” headsets? I use ritchey wcs on my 1056 and 696 from Carbonda.
April 22, 2022, 01:09:44 PM 		1