See likes

See likes given/taken


Your posts liked by others

Pages: [1] 2
Post info No. of Likes
Airwolf YFR068 - 2023 Gravel Frame Hi All,

I’ve just come across what looks to be a new Airwolf gravel frame on Aliexpress.

https://a.aliexpress.com/_mq8tUOE

Geometry (checked 54cm) appears identical to Aspero.
Tyre clearance noted as 700x40c
Cannot see this frame on the Airwolf website yet.

I’ve been looking for an Aspero type frame for a few months to do road + light gravel build with Ultegra 12s.

Just wondering if anyone has either ordered one or come across this frame elsewhere?
March 06, 2023, 09:13:32 PM 		1
Re: Airwolf YFR068 - 2023 Gravel Frame I ended up ordering one of these frames from Airwolf on Aliexpress and it arrived yesterday. Custom paint colour.

Includes handlebar, stem, headset, seatpost, thru axles and a bottom bracket.

Does have flip chip in front fork, also di2 bar end junction insert piece for downtube (for 11 speed di2) and fork is D type for internal routing.

One minor issue I have noticed is the front derailleur cable routing is set up for a traditional cable set up and I will need to drill out the cable hole to be larger to allow a Shimano Di2 cable to fit through.

Weights:
Frame weight (painted frame with seatpost clamp) 1149g
Uncut fork weight 446g
Seatpost incl saddle clamp 217g
Stem (carbon with aluminium faceplate) 145g
Handlebars 42cm 237g
Rear thru axle 41g
Front thru axle 33g
Headset bearings 39g
Fork compression plug 38g
C ring 10g
Cap on C ring/top fork bearing for routing 8g
Spacers 6g each (3x)
Fork top cap 13g
Rear derailleur hanger 15g
Bottom bracket 115g

Some photos attached. Looks pretty good to me.
Will be building up with Shimano Di2 12 speed. Have ultegra levers, brakes and 50/34 crankset, thinking of using 105 FD and RD along with 11-36 cassette.
May 09, 2023, 08:51:16 PM 		9
Re: Airwolf YFR068 - 2023 Gravel Frame This one from Aliexpress

threaded first BB7946 BBright Bottom Bracket Bike Bicycle Bottom Bracket 24mm*24mm for Cervelo
https://a.aliexpress.com/_mMq8HVe
May 10, 2023, 05:03:53 AM 		2
Re: Airwolf YFR068 - 2023 Gravel Frame
Quote from: wolffcon on May 17, 2023, 10:22:18 AM
Would you be able to measure the tire clearance for me? I know airwolf says 40mm, but I’m hoping it’s more like an aspero at 45mm… Thanks!

Please see attached photos - measured roughly with tape measure. Looks to be around 45-48mm clearance between both the chainstays (IMG_7148) and seatstays (IMG_7146).

I am planning on mounting 38mm tyres so I will measure the inflated tyre width with calipers and remaining clearance to chainstays. I'm currently waiting on the wheelset to turn up - I have ordered a set of Ryet 38mm deep x 30mm wide gravel wheels with 36t rachet hub.

EDIT - see page 2. Clearance for 45mm tyres would be OK. Approx. 56mm total with 700c tyre and wheel mounted
May 18, 2023, 03:59:08 AM 		2
Re: Airwolf YFR068 - 2023 Gravel Frame I have now received my wheels.

2023 Ryet Gravel Carbon Wheelset with 36t rachet style hub. They weigh in at 1490g which is approx. 60g heavier than the quoted 1430+/-30g.
30mm wide hookless rim and 38mm deep.
They were well packaged and seem well finished. Came with tape installed and 2 spare spokes and 2 spare nipples.

Now just waiting on final parts to arrive so I can commence my build. Should have everything within the next 1-2 weeks.

Will be built with a mix of Shimano 12 speed Di2:
- Ultegra levers, brakes, 50/34 compact crankset
- 105 front and rear derailleurs

Already have 11-30t and 11-34t Ultegra cassettes which I'll use initially and grab a 105 11-36t when they are available.

Tyres wise I ended up purchasing Pirelli Cinturato Gravel H in 35mm width. I was a bit concerned about clearance and the potential for front derailleur to further decrease clearance. When these turn up I will mount to wheels and measure clearance.
May 23, 2023, 11:32:44 PM 		5
Re: Airwolf YFR068 - 2023 Gravel Frame Photos of tyre clearance with 35mm Pirelli Cinturato Hard
June 07, 2023, 05:20:38 PM 		3
Re: Airwolf YFR068 - 2023 Gravel Frame Approx. 5 weeks from order.

Took around 2.5 weeks until colour dialogue started (and prompt agreement was reached) and then around 2.5 weeks postage from China to Australia.

I’m planning to build the bike up this weekend so will post some photos and any issues I come across.
June 08, 2023, 03:53:23 AM 		2
Re: Airwolf YFR068 - 2023 Gravel Frame So I started the build over the weekend. Comments and issues as follows.

If running internal di2 cables, recommend an internal cable routing kit. I have ZTTO version from Aliexpress.
Disc brake cables were able to be routed without internal cable routing kit so if using wireless SRAM should be OK without internal routing kit.

I had to drill out aluminium cable boss for front derailleur (IMG_7361,7363,7365). As mentioned previously, it was set up for a traditional cable with internal cable housing. I'm running di2 so needed a larger diameter hole. I used a 5mm metal drill bit and hole will be plugged with di2 grommet. Then I found out the front di2 cable I ordered is too short so need to order another to fit front derailluer  >:(

When mounting the rear disc brake, the bolt holes were not entirely neat (slightly oval shaped) so had to use a 5mm wood drill bit to gently clear out a bit of carbon to get caliper bolt through the frame. (IMG_7366)

Biggest issue so far was the supplied d-shaped compression plug. The supplied plug does not have a threaded insert to accept a bolt to screw the stem top cap down. There was also no screw for the top cap supplied. I have contacted Airwolf and they have said there is a problem and will send me a new one. (IMG_7367,7368) Not an issue, see post below.

So my build is part completed pending a new compression plug from Airwolf and a longer front di2 cable.
June 12, 2023, 04:35:57 AM 		1
Re: Airwolf YFR068 - 2023 Gravel Frame
Quote from: tanksofnew on June 13, 2023, 11:58:49 PM
Looking to buy one of these frames and use 40mm tires with a di2 setup like yours, what is the tire clearance like with an di2 front mech? Is it limited at all by the front mech? Thanks in advance

Sorry for the delay in responding. I've been waiting for the longer di2 cable to turn up, which finally arrived today.

Clearance with a 105 FD-R7150 di2 front derailleur is still around 9-10mm between 35mm tyre and derailleur body. I tried measuring with calipers but doesn't really work. See photos attached.
Worth mentioning the 105 R7150 FD is different to the 12 speed Ultegra R8150 and Dura Ace R9250 FDs so if using them the clearance might be different. The R7150 FD is very similar to the older Ultegra R8050 di2 11 speed FD.

As an aside, if anyone else does a 12 speed di2 build, 1200mm for rear derailleur and 700mm for front derailleur work for a 54cm frame.
June 20, 2023, 04:42:03 AM 		2
Re: Airwolf YFR068 - 2023 Gravel Frame Very close to complete now ;D

Weighs in at 7.79kg without chain, pedals and bottle cages so will be in low-mid 8kg range with these.

No issues to report other than what I have already posted.

50/34 crankset fits and would be the maximum size based on clearances.

A couple of build tips
- remember to use foam brake cable housing so brake lines don't make noise in the frame
- use carbon assembly paste as seatpost will likely slip otherwise
- torque wrench essential
- download the Aspero 5 assembly manual and follow torque amounts and details in there  ;)
- Out front garmin mount - Style 1 > https://www.aliexpress.com/item/1005002820591761.html

If anyone has any questions, happy to answer them.
June 24, 2023, 01:32:21 AM 		3