See likes

See likes given/taken


Your posts liked by others

Pages: 1 2 3 [4]
Post info No. of Likes
Re: Is anyone aware of any frame designers that would assist with a custom design? One of my Waltly Ti is also 31.6mm seatpost with a 31.75mm bore. I have a Tito titanium seatpost on it with no problem. I also have a Waltly Ti with 27.2mm seatpost with 27.35mm bore, and the CarbonSpeed cf seatpost fits with no problem. And just recently received my 3rd Waltly Ti frame. Haven't built it yet but the KS 27.2mm dropper post fits pretty snug in the 27.35mm bore. I will update when it's built. I still have some parts & components in transit.

@Flying Trunk Monkey, I can only speak for Amy of Waltly. I've only dealt with her, twice at that. I'm very satisfied with her service, got to say she's probably the most patient person I've transact with. She also seems to have ample knowledge with bike parts. I remember after I gave her the list of geometry figures, she asked me if I want them to adjust the head tube length in case I am considering a Chris King Inset 7 headset. I believe that is related to your X spec component & Y fit component. You'll just have to be specific, and she'll ask you if she didn't understand.
August 08, 2022, 11:51:47 AM 		1
Re: Tsunami Seaboard GR02 Budget Gravel Build I've seen a number of Tsunami Seaboard builds locally. Like almost dozen had cropped up on the local FB bike groups during the COVID Lockdown alone. Most were built as gravel bikes. And almost always, they went with the chrome finish. They look really good to be honest. Yours is the first black built I've seen... very sexy built. As far as durability is concerned, I haven't heard/read of anyone reporting and any failures yet... and that's at least a couple of years already.
September 04, 2022, 09:24:10 PM 		1
Re: Custom Waltly Titanium 29er
Quote from: jefflinde on March 26, 2023, 06:44:38 PM
Sorry if this has been asked but i was not able to find it.   what does a basic Ti frame from Waltly cost?  i know this is a loaded question as there is a lot of customizing that can be done but just a run of the mill gravel frame or road frame?  I would really like to go this route but i kind of want to have a ball park before i get going.  Thank you in advance.

My 3rd one, commissioned on 2022 was US$1300. Excluding shipping & duties. My frame costs more as I had ovalize top tube.
March 27, 2023, 08:48:20 PM 		1
Re: Custom Waltly Titanium 29er
Quote from: bxcc on March 27, 2023, 08:04:28 AM
What size seat post on your Waltly frames? This one has a 31.6 post and it's a sloppy fit. My gravel frame from Waltly has a 30.9 and it fits much better with no slop.

My gravel bike & touring bike are 27.2mm while my ht mtb was 31.6mm. Never had any issues with any of my seatposts (cf, titanium & dropper post).
March 27, 2023, 08:51:22 PM 		1
Re: Chinese Titanium Frames... My 3 Waltly titanium bikes...

Nov 2018 - custom geo Gravel Bike
 setup              - flatbar, single speed (was setup as 1x11 & 2x11 before)
 mileage          - 14,000km (approx)
 notable rides - Audax 200km, 300km & 400km
 rides on          - 70% paved roads, 30% gravel roads

July 2020 - custom geo MTB
 setup              - full-rigid 29er, 1x11
 mileage          - 7,500km (approx)
 notable rides - 300+km overnight bikepacking
 rides on          - 70% trails & gravel, 30% paved roads

Aug 2022 - custom geo Gravel Bike
 setup              - flatbar, 2x11 touring bike
 mileage          - 3,000km (approx)
 notable rides - Audax 300km & 600km
 rides on          - 90% paved roads, 10% gravel roads

All 3 are currently in service and still in very good condition.


* Dates are when bikes are built not when frame were received.
January 29, 2024, 04:10:55 AM 		2
Re: Titan Hardtail 2024 Very happy with my 3 units from Waltly.
March 01, 2024, 08:10:27 PM 		1