I have "upgraded" the headset expander plug and compression ring /base ring (the one with the holes to run cables through), so it matches the new version for the SL 7. However the new compression ring / base ring is a bit lower/thinner than the old one, meaning that the headset cover now sits so low that it is not clearing the frame. A solution could be to add a micro spacer or two (.25 mm each), to lift the headset cover back in to place, but I will need to cut them in a C-shape to make room for the cables. Another solution is of course to just use the one included with the frame. Anyone who has a need solution, or tried with the micro spacers?

I used the expander with the parts that were delivered with the frame. Works fine, clocked 1k km without issues.

I have "upgraded" the headset expander plug and compression ring /base ring (the one with the holes to run cables through), so it matches the new version for the SL 7. However the new compression ring / base ring is a bit lower/thinner than the old one, meaning that the headset cover now sits so low that it is not clearing the frame. A solution could be to add a micro spacer or two (.25 mm each), to lift the headset cover back in to place, but I will need to cut them in a C-shape to make room for the cables. Another solution is of course to just use the one included with the frame. Anyone who has a need solution, or tried with the micro spacers?

I'm looking at older Crux framesets, like a 2019 model. No way I could buy a newer frameset!

 Same here. Plus If I had one I would probably break it. I weigh 200 lbs, I could skip lunch and make up the difference in weight. LOL

It's not super light by any means but most stock name brand gravel bikes are over this. What alloy bike did you have that was lighter ? I had a Trek Checkpoint that was 21 lbs. I think without any of the junk (bags, tools, spare tube, food, bottles, f & r lights, garmin, gopro etc) on there it's 18 lbs. I have a Colnago Master that is 18 lbs LOL

I was originally using a Poseidon X alloy frameset that I eventually gifted to a family member. It was running in 1x configuration and it came out to about 20 lbs. I eventually swapped out the parts to an old 2017 Kinesis carbon frameset that I had laying around and now it's at the 7.9kg/17.5 lbs. mark. Nothing wrong with the frame, but it has external brake cabling. I'm tempted to drill an internal brake hole in the frame, but I'm worried about affecting the structural integrity.

The weight difference between my carbon road and gravel bikes are only about 1-1.5 lbs. Most of that extra weight is just in my tires, cassette and slightly heavier GRX shifters. I think my gravel wheelset actually weighs less than my road wheels.

I'm looking at older Crux framesets, like a 2019 model. No way I could buy a newer frameset!

looks cool.
U still think position is ok? or do you feel stretched?

How much did u pay for the shipping of frame + wheels?