See likes

See likes given/taken


Your posts liked by others

Pages: [1]
Post info No. of Likes
Re: Airwolf: What is this model inspired from? [Trek Madone]
Quote from: Deo on December 24, 2023, 03:12:06 PM
did somebody go with SLR from airflow, at the end?

Hi - i'm currently in the process of building an Airwolf SLR. Ordered in late November from their website and received around 6 weeks later in Germany (framesize 54/M, matte black)

Here are my impressions and issues so far:
- the paint job is quite good as far as i can judge, the matte is naturally a bit sensitive
- upper bore hole for the front brake caliper mount is around 2mm off -> had to file the caliper to make it fit
- lower headset bearing sits quite loose on the fork carbon crown but fits good into the frame (outer bearing diameter okay) -> have to measure the diameter of the fork and the bearing inner diameter. I fear the fork diameter is a bit off (or they send me an incorrect lower headset bearing)
- internal routing of the hydraulic cables through the handlebar is not the easiest job but managed to finish it with the help of an internal cable routing tool and sticking an older bowden cable to the hydraulic cable and pulled it through the bar.
- bottom bracket bearing (T47) fits pretty good
- saddle clamp and the area around the "iso flow hole" seem to be fine so far also

I'm installing a Shimano 105 12speed groupset and haven't decided which wheelset to put on yet. Overall it will probably not be the lightest build. Will upload some pics later on.
January 25, 2024, 10:35:17 AM 		1
Re: Airwolf: What is this model inspired from? [Trek Madone] took me a while to get through all the hassles building this bike but here it is ready to ride now:

- issue with upper headset play solved by mounting an additional c-ring as a spacer above the compression ring
- lower headset bearing needed some alu tape wrapped around the inside (fork diameter was too small for lower headset bearing, but the bearing has the dimensions as the "original")
- front brake caliper needed to be filed as the upper bore hole in the fork was about 2mm off
- the delivered seatpost mount cracked at about 3-4NM torque while mounting the saddle tilt screw (see photo). As i think this is a general construction issue and i don't trust the replica here, i bought a slightly used original one
- no feedback coming back from airwolf, only that they will check with their quality control...

Overall the bike fits and rides quite good. Coming from an aero bike of the first generations i subjectively would say that this one feels a bit stiffer and more aerodynamic. However i guess that a big factor for this is coming from the wheels.
April 06, 2024, 02:00:42 PM 		2