Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - zerstorer

Pages: [1] 2 3 ... 6
1
Road Bike Frames, Wheels & Components / Re: WheelTop EDS TX Full Wireless Groupset (Chinese SRAM)
« on: May 11, 2024, 06:32:12 PM »
I am using Karoo2 and it's working with Ltwoo.
Hopefully it's a firmware update away.

2
Road Bike Frames, Wheels & Components / Re: WheelTop EDS TX Full Wireless Groupset (Chinese SRAM)
« on: May 11, 2024, 03:45:40 PM »
Qn for the wheeltop users here. Is it working with the bike computers that you are using?  There are videos showing it working with igpsport and displaying both gearing and battery life.

What about others like Garmin/wahoo/hammerhead?

3
Road Bike Frames, Wheels & Components / Re: Magene QED 12spd groupset showcased in Shanghai
« on: May 08, 2024, 05:11:45 PM »
Quote from: patliean1 on May 08, 2024, 09:08:42 AM
What's the difference between the QED chainrings, and the optional chainrings supplied with the PES? I'm trying to understand by Magene's QED video.

Are the QED rings similar to SRAM Red's one-piece design?
Basically QED just denotes that it's DUB spindle. Can be any configuration.

PES is for 24mm spindle.

4
Road Bike Frames, Wheels & Components / Re: Magene QED 12spd groupset showcased in Shanghai
« on: May 08, 2024, 08:27:40 AM »
My QED powermeter crank and chainrings are still ok after 2years.

5
Road Bike Frames, Wheels & Components / Re: LTWOO ER9 & ERX - Electronic groepsets
« on: May 07, 2024, 06:42:10 AM »
Check the charger or the batteries.
Mine does about 7000-8000 shifts before it drops to 30%

6
Road Bike Frames, Wheels & Components / Re: Magene QED 12spd groupset showcased in Shanghai
« on: May 06, 2024, 11:35:20 PM »
I used to have a similar power imbalance. You may need shims or insoles. However, just lowering the saddle 1.5cm for me made the balance equal.

7
Road Bike Frames, Wheels & Components / Re: Question about L-Twoo ERX rear derailleur
« on: May 06, 2024, 06:35:11 PM »
Did you try to microadjust each cog individually?

8
Road Bike Frames, Wheels & Components / Re: Magene QED 12spd groupset showcased in Shanghai
« on: May 06, 2024, 07:13:16 AM »
Quote from: Petr (CyclistsHub.com) on May 06, 2024, 05:37:00 AM
My source sent me this photo that Magene told him about the shifter disc + rim compatibility. But I honestly have no idea how it works.

According to the Chinese conversation in the cyclisthub video, the hole on top is for mechanical brake cable. The hydraulic brake hose goes to the traditional location below.

It's one single design that accepts both mechanical and hydraulic braking. Neat.

9
Road Bike Frames, Wheels & Components / Re: LTWOO ER9 & ERX - Electronic groepsets
« on: May 02, 2024, 03:17:31 PM »
Try the seventh gear recalibration.

10
Component Deals & Selection / Re: RIRO cassette failure
« on: May 01, 2024, 08:03:37 PM »
Better stick to all steel cassettes

11
Road Bike Frames, Wheels & Components / Re: LTWOO ER9 & ERX - Electronic groepsets
« on: May 01, 2024, 06:54:05 AM »
Try another power bank or DC source.

12
Road Bike Frames, Wheels & Components / Re: Seka Spear
« on: April 30, 2024, 06:24:51 AM »
Bross Zenith full bike with 105di2 groupset is 19000rmb in china.

But there is another frame that is very interesting:
The Kung Mach which is available for 10000rmb frame only.

13
Road Bike Frames, Wheels & Components / Re: LEXON Road Carbon Crankset
« on: April 30, 2024, 06:17:42 AM »
They keep recommending the Shimano tl-fc33 which is clearly for external splines where as the powermeter comes with internal spline lockring.

14
Road Bike Frames, Wheels & Components / Re: LEXON Road Carbon Crankset
« on: April 29, 2024, 08:43:51 AM »
I have a old 20tooth BB tool that I used to remove square taper cranks years ago.

It looks almost the same but the splines on the tool are slightly too thick. I have tried ordering another one to see

15
Road Bike Frames, Wheels & Components / Re: LEXON Road Carbon Crankset
« on: April 29, 2024, 05:46:51 AM »
I am getting fed up with the Lexon store that sold me the crank and powermeter combo. It seems that they do not know which is the tool that can install the spider. They pointed me to Shimano TL-FC33 which does not fit at all and now they are not replying.

Pages: [1] 2 3 ... 6