Chinertown

Other Resources => Component Deals & Selection => Topic started by: BrianO on February 18, 2021, 10:42:06 AM

Title: Sensah Empire Pro
Post by: BrianO on February 18, 2021, 10:42:06 AM

My rear shifter cable seemed to be a bit short, so I bought a longer one, but i am now struggling to replace the new rear shifter cable.
Any advice?

Title: Re: Sensah Empire Pro
Post by: Nicoloc on February 18, 2021, 12:24:51 PM

hi 
Here are some instruction regarding the sensah empire
http://www.disraeligears.co.uk/Site/Sensah_road_drive_train_system_-_instructions_scan_1.html (http://www.disraeligears.co.uk/Site/Sensah_road_drive_train_system_-_instructions_scan_1.html)
I changed my front derailleur cable, It was not super easy but not complex.
Peal off the rubber cover.
Push the cable, it will pop out on the inner side of the shifter.
(make sure you are on the position where cable should have no tension : lower gear)
put the new cable in place and push will while helping the cable to follow the  shifter meacnism curve (that's the boring/ difficult aspect).


hope this help

Title: Re: Sensah Empire Pro
Post by: BrianO on February 20, 2021, 05:04:11 PM

Thank you,
I managed to retread the cable!!