Chinertown
Chinese Carbon MTB => 29er => Topic started by: samroy92 on February 07, 2018, 04:24:25 PM
-
Hi guys I just received the Workswell 062 carbon frame, and just about the bottom bracket there is a tiny pinhole:
https://imgur.com/a/0BQ4A (https://imgur.com/a/0BQ4A)
(https://imgur.com/a/0BQ4A)
Is this normal?
-
Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?
-
I think your information is very useful for me.
-
If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.
-
Yes it's for running a front derailleur cable. The hole looks weird though. Any chance you could take a clearer picture?
You were right, after putting the bike together I found out it was for the front derailleur cable. Thanks a bunch!
-
If you do not use a front derailleur, plug this hole with silicone or a rubber plug to limit water ingress.
Good tip, yes I decided to go with single speed in the front, thanks!